Setting Mode - Janome MEMORY CRAFT 9500 Instruction Book

Designs
Hoop Size A(F): 126 110mm
X
1 2
5 6
Screen Contrast
3
5
4
Eco Mode
10
min
5
inch/mm
Register
3 4
A Z
7 8
SET
Edit
1
SET
+
+
inch mm
2

SETTING MODE

Pressing the SET key will open the mode setting
window.
1 SET key
Press the SET key to customize the machine settings.
2 Flag key (Language selection key)
Press the flag key to select the language for the
screen display. You can select one of 11 languages.
3 Screen contrast
The visual touch screen contrast can be adjusted.
Press the Plus
Press the Minus
4 Sound control
The buzzer volume can be adjusted. The volume level
can be set from (0 to 10) and the default setting is 5.
Press the Plus
Press the Minus
volume.
When you select 0 the buzzer turns off.
5 Eco mode
After turning on the power switch, if you have not used
the machine, after a while, the machine will enter Eco
Mode. The visual touch screen will go dark and the
sewing light will turn off.
Whenever you touch the screen while the machine is
in Eco mode, the screen and sewing light will turn on
again.
You can set the Eco mode timer from 1 minute to 30
minutes. The default setting is 10 minutes.
To set the Eco Mode timer:
Press the Plus
Press the Minus
To turn off the Eco mode, Press the Plus
"OFF" shows in the box.
22
key, to sharpen the screen contrast.
key, to fade the screen contrast.
key, to increase the buzzer volume.
key, to decrease the buzzer
key to increase the timer setting.
key to decrease the timer setting.
key until