Embroidery Mode; Embroidery Hoops - Janome MEMORY CRAFT 9500 Instruction Book

3
1
2
STARTING POINT FOR MONOGRAMMING
STARTING POINT FOR MEMORY CARDS ( FROM K-101 )
10 9
3
1
2
STARTING POINT
4
5
6
STARTING POINT FOR BUILT-IN DESIGNS
7
8
4
6
5
75

EMBROIDERY MODE

Embroidery Hoops

Embroidery Hoop A:
This is the standard size hoop, with a 12.6 cm (5") by
11 cm (4 3/8") embroidery area for sewing PC Card
embroidery designs etc.
1 Outer Hoop
2 Inner Hoop
3 Attaching Knob
4 Hoop Tightening Screw
Template for Embroidery Hoop (A)
5 Starting Point for Monogram in Vertical
Orientation
6 Indicates the embroidery boundary for
built-in designs, PC Design Card Nos. 1001
and up.
7 Indicates the embroidery boundary for
Memory Card No. 102 and up.
8 Starting Point for Built-in designs and
monograms
9 Starting Point for the designs from Memory
Card Nos. 102 and up
10 Starting Point for Monogramming in
Horizontal orientation.
Embroidery Hoop B:
This is the large-size hoop, with a 20 cm (8") by 14 cm
(5 1/2") embroidery area for sewing large-size designs
and combined designs.
1 Outer Hoop
2 Inner Hoop
3 Attaching Knob
4 Hoop Tightening Screw
Template for Embroidery Hoop (B)
5 Starting Point for Built-in designs and
monograms
6 Indentations for Positioning the Template
NOTE:
The four indentations on the template do not
correspond with reference lines.