Table of Contents
Advertisement
q
z
x
c
q
w
e
Setting Mode
In the setting mode, you can set the following functions.
• Buzzer sound setting
• Needle stop position setting
• Auto-off timer setting
To enter the setting mode, turn the power switch off.
Press and hold the needle up/down button q and
turn the power switch on until the setting mode screen
appears.
NOTE:
The auto-off timer is available in EU countries and
some regions which use 200 - 240 voltage standards.
Buzzer sound setting
The buzzer sound can be turned on or off using the
buzzer sound setting.
Enter the setting mode.
The default buzzer sound setting is "ON", and the "on"
mark is blinking.
z To turn the buzzer sound off, press "+" of the stitch
length adjusting key q, and the "oF" mark will blink.
* Caution buzzer sound cannot be turned off.
x To turn the buzzer sound on, press "+" of the stitch
width adjusting key w, and the "on" mark will blink.
c Press the START/STOP button e to apply the setting.
24
Advertisement
Table of Contents
