Groups - Exacq Vision User Manual

Groups

NOTE: The Groups page is not available in exacqVision Start.
1
The Groups page allows you to create logical groups of cameras and other items connected to one or more systems. This
is a useful when you have multiple systems with a large number of cameras spread across a large building or campus, and
you would like to place cameras in logically named groups such as First Floor, Second Floor instead of viewing your
cameras in default groups based on their connection to the systems. You can also search for video from entire camera
groups instead of adding each camera individually during the search.
1. Create a new group by clicking on the New button.
2. In the Group Configuration section, enter a name and description for the group.
3. Select an icon to represent the group in the Live and Search site trees.
4. Select a camera from the Available Items list. Video from the camera is displayed in the video window.
5. Click Add to include the camera name in the Items in Group section. Continue adding cameras until your group is
complete.
6. To remove a camera from the group, select it in the group list and click Remove.
7. When finished, click Apply.
These groups can now be selected in Live mode to monitor live video or search recorded video.
NOTE: To display specific cameras in specific pre-configured combinations, create a view as described in the "Views"
section of this manual.
www.exacq.com
2
3
6
+1.317.845.5710
+5255.56080817
+44.1438.310163
71
4
5
USA (Corporate Headquarters)
Mexico
Europe/Middle East/Asia
7