B Regulatory Notice - Exacq Vision User Manual

B
Regulatory Notice
Federal Communications Commission (FCC)
Radio Frequency Interference Statement
The Exacq Product contains incidental radio frequency-generating circuitry and, if not installed and used properly, may
cause interference to radio and television reception. This equipment has been tested and found to comply with the limits
for a Class A computing device pursuant to Subpart J of Part 15 of the Federal Communications Commission (FCC) Rules.
These limits are designed to provide reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area may cause interference to radio and television reception,
in which case users will be required to correct the interference at their own expense. If this equipment does cause
interference to radio or television reception, which can be determined by turning the equipment off and on, users are
encouraged to try to correct the interference by one or more of the following measures: Reorient the television or radio
receiving antenna, and/or relocate the Exacq product and the radio or TV with respect to each other. If necessary, users
should consult the manufacturer or an experienced radio/television technician for additional suggestions. Users may find
helpful the following booklet prepared by the Federal Communications Commission: "How to Identify and Resolve Radio-
TV Interference Problems," which is available from the Government Printing Office, Washington DC, 20402 (stock #004-
000-00345-4).
CE Notice
Marking by the symbol indicates compliance of this device to the EMC directive of the European Community. Such
marking is indicative that this device meets or exceeds the following technical standards:
- EN55022: Conducted Emissions
- EN55022: Radiated Emissions
- 61000-4-2 Electrostatic Discharge
- 61000-4-3 Radiated Immunity
- 61000-4-4 Electrical Fast Transients
- 61000-4-5 Surge Immunity
- 61000-4-6 Conducted Immunity
Electromagnetic compatibility (EMC) requires the use of shielded cable and ferrite cores for all wiring added by the user.
Good shielding techniques should be applied in the user's system.
www.exacq.com
+1.317.845.5710
+5255.56080817
+44.1438.310163
113
USA (Corporate Headquarters)
Mexico
Europe/Middle East/Asia