atBox Technology InternetVue DT11‐KIT User Manual page 6

Configurat tion and Setup p
1. You w will need to set fixed IP addres
and so o that the DT11 1 units will not
setting g the IP addres sses on the uni

The TX and RX units a
betwee en (one‐to‐one

There i s only one TX
or rout ters are connec

There i s only one TX
routers s are connecte
many o operation):
sses for each o of your DT11 de
t interfere with h any other dev
its, and go to S Step 2, only if:
are connected only by an Eth
e operation):
DT11‐TX
unit, and one o or more RX un
cted to that sw witch (one‐to‐m
DT11‐TX
unit, and one o or more RX un
d to that switc ch, but reside o
DT11‐TX
PCs on 192 2.168.1.x subn et
evices. This is necessary for
vices on your n network. How
hernet cable, w with no router o
DT T11‐RX
its are connect ted through a s
many operation n):
DT T11‐RX
DT T11‐RX
its are connect ted through a s
on a subnet oth her than 192.1
DT11‐RX
DT11‐RX
proper operat tion,
ever, you can s skip
or switch in
switch, but no PCs
switch. PCs an nd/or
168.168.x (one ‐to‐