Connecting To Dvi (Digital Visual Interface); Connecting A Digital Audio System - Samsung HL-S5065W Owner's Instructions Manual

Connecting to DVI (Digital Visual Interface)

Connect a set of audio
1
cables between the DVI
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
Connect an HDMI/DVI cable
2
between the HDMI 2/DVI IN
jack on the TV and the DVI
OUT jack on the Set-Top Box.
NOTES
• Make sure the DVI source's
power is on, or you will be
unable to select it in the
TV menu's source list.
• The HDMI/DVI IN jack is not
compatible with PC.

Connecting a Digital Audio System

There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below.
For more information, see your audio system owner's manual.
If your audio system has an
1
optical digital audio input,
connect to the DIGITAL
AUDIO OUT (OPTICAL) jack
on the TV.
NOTES
• OPTICAL: converts the electric
signal into an optical light
signal, and transmits it through
glass fibers.
• When a Digital audio system is
connected to the Digital Audio
Out (Optical) terminal:
Decrease the gain (volume) of
the TV, and adjust the volume
level with the audio system's
volume control.
Downloaded from www.Manualslib.com manuals search engine
TV Rear Panel
Incoming
Cable or
Antenna
DTV Set-Top Box
TV Rear Panel
1
Audio System
1
2
English - 23