Connecting A Camcorder; Connecting A Digital Tv Set-Top Box; Connecting To Dvi (Digital Visual Interface) - Samsung HC-R4245W Quick Setup Manual

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to
view the camcorder tapes without using a VCR.
Locate the A/V output jacks on the
1
camcorder. They are usually found on
the side or rear of the camcorder.
Connect a set of audio cables between
2
the "AV 3 (L, R)" jacks on the TV and
the AUDIO OUT jacks on the
camcorder.
If you have mono camcorder, connect
L(mono) to camcorder audio out using
only one audio cable.

Connecting a Digital TV Set-Top Box

Connecting to DVI (Digital Visual Interface)

By inputting a high-bandwidth Digital Content Protection high-definition picture source to the DVI
INPUT jack on the TV, high-definition pictures can be displayed on the screen in their digital form.
Connect a set of audio cables between
1
the "DVI IN (AUDIO) (L, R)" jacks on the
TV and the AUDIO OUT jacks on the
Set-Top Box.
Connect a video cable between the "DVI
2
IN (VIDEO)" jack on the TV and the
VIDEO OUT jack on the Set-Top Box.
• The DVI INPUT jack is not
compatible with the picture signal
of a personal computer.
• Use a DVI 25-pin cable
(commercially available) in order to
digitally connect the TV with a
DTV decoder.
TV Side Panel
S-Video Cable 3
or
Video Cable
Camcorder
TV Rear Panel
2
DVI Cable
English-6
Audio Cable
2
1
Audio Cable
1
From Cable or
From Antenna
DTV Set-Top Box