Download  Print this page

Samsung HL-S4266W Owner's Instructions Manual

Samsung dlp tv owner's instructions.
Hide thumbs

Advertisement

Owner's Instructions
HL-S4266W
HL-S4666W
HL-S5066W
HL-S5666W
HL-S6166W
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register

Advertisement

Table of Contents

   Also See for Samsung HL-S4266W

   Related Manuals for Samsung HL-S4266W

   Summary of Contents for Samsung HL-S4266W

  • Page 1 Owner’s Instructions HL-S4266W HL-S4666W HL-S5066W HL-S5666W HL-S6166W This device is a Class B digital apparatus. Register your product at www.samsung.com/global/register...
  • Page 2 A Guide to Digital TV • What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting.
  • Page 3 Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels.
  • Page 4: Table Of Contents

    Table of Contents Your New Wide TV...8 Viewing Position ...8 List of Features...9 Checking Accessories...9 Right side buttons...10 Side Panel Jacks ... 10 Front Panel LED Indicators...11 Rear Panel Jacks ...12 Remote Control...13 Connections ...16 Connecting VHF and UHF Antennas ...16 Antennas with 75-ohm Round Leads ...16 Connecting Cable TV ...17 Cable without a Cable Box...17...
  • Page 5 Picture Control ...60 Picture Control...60 Changing the Picture Size...63 Digital Noise Reduction ...64 Viewing the DNIe Demonstration ...65 Setting the My Color Control Mode ...66 Using the Color Weakness Enhancement Feature...68 Setting the Film Mode ...69 Freezing the Picture...70 Setting the Blue Screen Mode...71 Sound Control ...74 Sound Control ...74 Auto Volume...76...
  • Page 7 Your New Wide TV...
  • Page 8: Your New Wide Tv

    Your New Wide TV Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches) for ventilation purposes.
  • Page 9: List Of Features

    List of Features Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features: • Easy-to-operate remote control • Easy-to-use on-screen menu system you can access from right side buttons or remote control •...
  • Page 10: Right Side Buttons

    Your New Wide TV Right side buttons The buttons on the right side panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model. Press to switch between viewing TV programs and signals from connected components.
  • Page 11: Front Panel Led Indicators

    Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. The product color and shape may vary depending on the model. Indicator Light Key : Light is On : Light is Blinking : Light is Off TIMER LAMP STAND BY/TEMP Standby state.
  • Page 12: Rear Panel Jacks

    Your New Wide TV Rear Panel Jacks Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two sets of component video input jacks on the rear panel of your TV.
  • Page 13: Remote Control

    Activates TruSurround. (Refer to page 81) 17. Mode (TV/DVD/STB/CABLE/VCR) Selects a target device to be controlled by the Samsung remote control (i.e., TV, DVD, STB, CABLE, or VCR). 18. SOURCE Press to display all of the available video sources (TV, AV1, AV2, AV3, S-Video1, S-Video2, Component1, Component2, PC, HDMI1, and HDMI2).
  • Page 14 Your New Wide TV Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control.
  • Page 15 Connections...
  • Page 16: Connections

    Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 75-ohm Round Leads If your antenna looks like this: Plug the antenna lead into the ANT 2 IN (AIR) on the rear panel of your TV.
  • Page 17: Connecting Cable Tv

    Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box Plug the incoming cable into the ANT 1 IN (CABLE) on the rear panel of your TV.
  • Page 18: Cable With A Cable Box That Descrambles Some (but Not All) Channels

    Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). Find and disconnect the...
  • Page 19: Connecting A Vcr

    Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack Connect a video cable between the VIDEO IN (1 or 2) (or S-VIDEO IN) jack on the TV and the VIDEO (or S-VIDEO) output jack on the VCR. Connect a set of audio cables between the AUDIO IN (1 or 2) jacks on the TV...
  • Page 20: Connecting A Camcorder

    Connections Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV. You can use your camcorder to view tapes without using a VCR. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.
  • Page 21: Connecting A Dvd Player

    Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y, P Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the DVD player.
  • Page 22: Connecting A Dtv Set-top Box

    Connections Connecting a DTV Set-Top Box Connecting to Y, P Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect a set of video cables between the COMPONENT (1 or 2) VIDEO (Y, P...
  • Page 23: Connecting To Dvi (digital Visual Interface)

    Connecting to DVI (Digital Visual Interface) Connect a set of audio cables between the DVI AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect an HDMI/DVI cable between the HDMI 2/DVI IN jack on the TV and the DVI OUT jack on the Set-Top Box.
  • Page 24: Connecting To An Analog Amplifier

    Connections Connecting to an Analog Amplifier The AV OUT (AUDIO L/R) terminals cannot be used for external speakers. You must hook them up to an amplifier. When an audio amplifier is connected to the AV OUT (AUDIO L/R) terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the volume control audio amplifier.
  • Page 25 Operation...
  • Page 26: Operation

    Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the front panel. Plug & Play Feature When the TV is initially powered On, basic customer settings proceed automatically and subsequently: Setting the language, checking the antenna input, memorizing the channels, and setting the time.
  • Page 27 Press the ENTER button to start the auto program. By default, the cable TV system is set to “STD”. If you want to select another type of cable system, press the œ button and use the … or † button to select “STD”, “HRC”...
  • Page 28 Operation Option 1: Setting the Clock Automatically If you set “Clock Mode” to “Auto” in step 6, follow the instructions below. Press the ENTER button to select “DST”(Daylight Saving Time). Press the … or † button to select “Off” or “On”, then press the ENTER button.
  • Page 29: Viewing The Menus And On-screen Displays

    Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. You can also view the on-screen menu system and make some adjustments using the TV’s side panel buttons.
  • Page 30: Selecting A Menu Language

    Operation Selecting a Menu Language English - 30 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the ENTER button to select “Language”. Press the … or † button to select “English”, “Español”...
  • Page 31: Memorizing The Channels

    Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
  • Page 32 Operation Press the … or † button to select the Antenna connection, then press the ENTER button. • Air : “Air” antenna signal Cable : “Cable” antenna signal Air+Cable : “Air” and “Cable” antenna signals When selecting Cable TV system: Press the ENTER button to start the auto program.
  • Page 33: Changing Channels

    Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized.
  • Page 34: Customizing Your Remote Control

    Operation Customizing Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. NOTE •...
  • Page 35 Setting Up the Remote to Operate Your Cable Box Turn off your cable box. Press the CABLE button on your TV’s remote control. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the cable box code listed on page 39 of this manual for your brand of cable box.
  • Page 36 Operation Setting Up the Remote to Operate Your DVD Note on Using Remote Control Modes: DVD When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume. English - 36 Turn off your DVD. Press the DVD button on your TV’s remote control. Press the SET button on your TV's remote control.
  • Page 37 Setting Up the Remote to Operate Your Set Top Box Turn off your STB. Press the STB button on your TV’s remote control. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the STB code listed on page 39 of this manual for your brand of STB.
  • Page 38: Remote Control Codes

    Operation Remote Control Codes Brand Code SAMSUNG 000 001 002 003 004 005 077 078 079 ADMIRAL AIWA AKAI 004 027 032 AUDIO DYNAMICS 007 026 BELL&HOWELL BROKSONIC CANDLE 002 003 006 008 015 055 CANON 021 056 CITIZEN 002 003 006 008 015 055...
  • Page 39: Cable Box

    PANASONIC 003 022 027 037 044 PHILIPS 019 021 023 028 PIONEER 004 018 020 044 014 022 040 REGAL SAMSUNG SET-TOP BOX Product Code Ground wave STB 001 002 Satellite STB CABLE STB STB DVD COMBO Satellite STB HDD COMBO Standard...
  • Page 40 Operation Remote Control Codes SAMSUNG DVD Product Code 000 001 002 DVDR 003 004 BD Record 005 006 VCR COMBO 007 008 009 010 011 VCR Record DHR COMBO Code Brand ANAM AUDIOVOX AUDIOLOGIC ANABA APEX DIGITAL 070 071 074 086 083 084 088 111 112...
  • Page 41: Setting The Clock

    Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually NOTE •...
  • Page 42 Operation Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “Time”, then press the ENTER button.
  • Page 43: Setting The On/off Timer

    Setting the On/Off Timer NOTE • Auto Power Off When you set the timer “On”, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer “On”...
  • Page 44: Setting The Sleep Timer

    Operation Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180minutes). Alternate method Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from “30min”...
  • Page 45: Viewing An External Signal Source

    Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source Alternate method Press the SOURCE button on the remote control repeatedly to select an external signal source.
  • Page 46: Assigning Names To External Input Mode

    Operation Assigning Names to External Input Mode This feature enables you to name the input source you have connected. English - 46 Press the MENU button. Press the ENTER button to select “Input”. Press the … or † button to select “Edit Name”, then press the ENTER button.
  • Page 47 Channel Control...
  • Page 48: Channel Control

    Channel Control Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and Cable box). Then, when you press the FAV.CH button on the remote control, the TV displays only the favorite channels you previously stored, allowing you to quickly and easily find frequently watched channels.
  • Page 49 To View Your Favorite Channels list: Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Press the … or † button to select “Channel Manager”, then press the ENTER button. Press the … or † Air 2 button to select Air 2...
  • Page 50: Viewing The Channel Lists

    Channel Control Viewing the Channel Lists You can display a list of all channels or your favorite channels. Preset : To use the Channel Manager function, first run Auto Program (see page 31). Alternate method Press the CH MGR button on the remote control to display a list of channels.
  • Page 51: Editing The Channel Lists

    Editing the Channel Lists You can edit channels to be added or deleted. Preset : To use the Channel Manager function, first run Auto Program (see page 31). Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.
  • Page 52 Channel Control Press the ▲ or ▼ button to select “Delete” to delete a channel, then press the ENTER button; the mark will disappear. To select the deselected channel, select “Add” to add a channel by pressing the ▲ or ▼ button. mark will appear.
  • Page 53: Default List Mode

    Default List mode You can set All, Added or Favorite to be the Default List that appears when you press the CH MGR button. Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Press the …...
  • Page 54: Labeling The Channels

    Channel Control Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear below the channel number. NOTE •...
  • Page 55: Fine Tuning Analog Channels

    Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. NOTES • Only analog TV channels can be fine tuned. • “*” will appear next to the name of fine-tuned channels. Analog Press the MENU button. Press the …...
  • Page 56: Checking The Digital-signal Strength Digital

    Channel Control Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.
  • Page 57: Lna (low Noise Amplifier)

    LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). NOTES • LNA functions only when antenna is set to Air. • If the picture is noisy with the LNA set to On, select Off. •...
  • Page 59 Picture Control...
  • Page 60: Picture Control

    Picture Control Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard Alternate method Press the P.MODE button on the remote control repeatedly to select the desired picture mode. • Choose “Dynamic” for viewing the TV during the day or when •...
  • Page 61 Customizing the Picture Settings You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “Color Tone” according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings. NOTES • “Tint” doesn’t operate in HDMI, PC or any Component mode. •...
  • Page 62 Picture Control Press the ENTER button to return to “Mode”. Press the … or † button to select “Color Tone”, then press the ENTER button. Press the … or † button to select a particular option (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button.
  • Page 63: Changing The Picture Size

    Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. Alternate method Press the P.SIZE button on the remote control repeatedly to select one of the picture size settings. • “16:9”: Sets the picture to 16:9 wide mode. •...
  • Page 64: Digital Noise Reduction

    Picture Control Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. English - 64 Press the MENU button. Press the …...
  • Page 65: Viewing The Dnie Demonstration

    Viewing the DNIe Demonstration This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe Demo to On, you can view the applied DNIe and normal pictures on the screen for demonstration purposes. Using this function, you can view the difference in visual quality. NOTE •...
  • Page 66: Setting The My Color Control Mode

    Picture Control Setting the My Color Control Mode My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”) without affecting other colors on the screen. Using the Easy Control Menu •...
  • Page 67 Custom Settings Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Press the … or † button to select “My Color Control”, then press the ENTER button. Press the … or † button to select “Detail Control”, then press the ENTER button.
  • Page 68: Using The Color Weakness Enhancement Feature

    Picture Control Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to enhance the picture according to the user’s particular color weakness. English - 68 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.
  • Page 69: Setting The Film Mode

    Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. NOTE • Film mode is supported in 480i only. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button.
  • Page 70: Freezing The Picture

    Picture Control Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound will still be heard.) To cancel this function, press the STILL button again or press any button on the remote control. English - 70...
  • Page 71: Setting The Blue Screen Mode

    Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen”...
  • Page 73 Sound Control...
  • Page 74: Sound Control

    Sound Control Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL– button to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound.
  • Page 75 Press the œ or √ button to select a particular item to be changed. Press the … or † button to increase or decrease the selected frequency. Press the EXIT button to exit. NOTES • If you make any changes to the equalizer settings, the sound mode is automatically switched to the custom mode.
  • Page 76: Auto Volume

    Sound Control Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
  • Page 77: Choosing A Multi-channel Sound (mts) Track Digital

    Choosing a Multi-Channel Sound (MTS) track The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program. Alternate method Press the MTS button on the remote control.
  • Page 78: Choosing A Multi-channel Sound (mts) Track Analog

    Sound Control Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. Alternate method Press the MTS button on the remote control repeatedly to select an external signal source. NOTES •...
  • Page 79: Selecting The Internal Mute

    Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On to cut off sound from the TV’s internal speakers. NOTES • The VOL +, VOL - and MUTE buttons do not operate when the •...
  • Page 80: Setting The On/off Melody

    Sound Control Setting the On/Off Melody A melody sound can be set to come on when the TV is powered on or off. English - 80 Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button.
  • Page 81: Setting The Srs Tsxt

    Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
  • Page 82: Sound Reset

    Sound Control Sound Reset If Game Mode is On (Refer to page 86), the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer to the factory defaults. English - 82 Press the MENU button. Press the …...
  • Page 83 Special Features...
  • Page 84: Special Features

    Special Features Setting the Function Help Displays Help on the menu functions. NOTE • The function Help default setting is On. English - 84 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the …...
  • Page 85: Menu Transparency Level

    Menu Transparency Level Adjusts the transparency of the menu screen. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “Menu Transparency”, then press the ENTER button. Press the …...
  • Page 86: Using Game Mode

    Special Features Using Game Mode When connecting to a game console such as PlayStation realistic gaming experience by selecting the game mode to on. Restrictions on Game Mode (Caution) • To disconnect the game console and connect another external • If you display the TV menu in Game mode, the screen shakes slightly. If Game Mode is On •...
  • Page 87: Using The V-chip

    Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (you can change it later, if necessary). How to Change Your Password NOTES •...
  • Page 88 Special Features How to Enable/Disable the Rating Controls English - 88 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button.
  • Page 89 How to Set up Restrictions Using “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: “TV Parental Guidelines” or “MPAA Rating”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.
  • Page 90 Special Features You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol “ ”. To unlock a locked channel, press the ENTER button again. Press the …/†/œ/√ buttons and the ENTER button to activate the appropriate restrictions for TV (FCC) rating system.
  • Page 91 How to Set up Restrictions Using “MPAA Rating” The Movie rating system uses “MPAA” (Motion Picture Association of America) system, and its main application is for movies. When the rating control is on, the TV will automatically block any programs that are coded with objectionable ratings (either “MPAA Rating”...
  • Page 92 Special Features Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-MA Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit sexual content. TV-14 Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence.
  • Page 93 How to Set up Restrictions Using Canadian English Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the number buttons to enter your current 4-digit PIN.
  • Page 94 Special Features Press the … or † button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. “ ” symbol is indicated. To unlock a locked channel, press the ENTER button again. Press the EXIT button to exit. Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.
  • Page 95 How to Set up Restrictions Using Canadian French Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the number buttons to enter your current 4-digit PIN.
  • Page 96 Special Features Press the … or † button to select a appropriate restriction. Press the ENTER button to activate the restriction selected. “ ” symbol is indicated. To unlock a locked channel, press the ENTER button again. Press the EXIT button to exit. Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.
  • Page 97: Using The V-chip For Digital Channels

    Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. NOTES • If information is not downloaded from the broadcasting station, • Parental restriction information is automatically downloaded while • The downloadable US rating menu is available for use after Press the MENU button.
  • Page 98 Special Features You can independently lock the TV ratings. The locked TV ratings are indicated by the symbol “ ”. To unlock a locked channel, press the ENTER button again. Press the …/†/œ/√ buttons and the ENTER button to activate the appropriate restrictions for TV rating system.
  • Page 99: Viewing Closed Captions (on-screen Text Messages)

    Viewing Closed Captions (On-Screen Text Messages) The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Analog Press the MENU button. Press the …...
  • Page 100 Special Features Press the … or † button to select “Caption Mode”, then press the ENTER button. Press the … or † button to select submenu (CC1~CC4 or Text1~Text4) you want, then press the ENTER button. Press the EXIT button to exit. NOTES •...
  • Page 101: Viewing Closed Captions (on-screen Text Messages)

    Viewing Closed Captions (On-Screen Text Messages) The Digital Captions function operates on digital channels. NOTE • “Caption Options” are available only when “Service1~ Service6” can be selected in “Caption Mode”. Digital Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.
  • Page 102 Special Features Press the … or † button to select “Size”, then press the ENTER button. Press the … or † button to select one you want, then press the ENTER button. Set other listed options below using the same method as above. Press the EXIT button to exit.
  • Page 103 PC Display...
  • Page 104: Pc Display

    PC Display Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. Connecting a PC (15p D-SUB) to the TV Connect a PC cable between the PC Output jack on the PC and the RGB input jack...
  • Page 105 PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Right click the mouse on the Windows Desktop, then click on Properties.
  • Page 106 PC Display Display Modes Mode Resolution Horizontal Frequency [KHz] 640 x 350 31.47 720 x 400 31.47 640 x 480 31.47 35.00 37.86 37.50 SVGA 800 x 600 35.16 37.88 48.08 46.87 1024 x 768 48.36 56.40 60.02 VESA 640 x 480 35.000 43.269 720 x 400...
  • Page 107: Adjusting The Picture Quality

    Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen. NOTE •...
  • Page 108: Changing The Picture Position

    PC Display Changing the Picture Position After connecting the TV to your PC, adjust the position of picture if it is not well-aligned. English - 108 Press the SOURCE button to select “PC”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.
  • Page 109: Adjusting The Picture Quality And Position Automatically

    Adjusting the Picture Quality and Position Automatically This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. Press the SOURCE button to select “PC”. Press the MENU button. Press the …...
  • Page 110: Changing The Picture Size (pc Mode)

    PC Display Changing the Picture Size (PC Mode) You can select the picture size which best corresponds to your viewing requirements. NOTES • “Wide TV”: Scales the picture to the size of the TV screen, • “Wide PC”: Scales the picture to 92% of the TV screen, •...
  • Page 111: Viewing The Current Resolution

    Viewing the Current Resolution You can get the resolution information of your PC. NOTE • To change the resolution, see pages 105~106. Press the SOURCE button to select “PC”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.
  • Page 112: Initializing The Picture Settings

    PC Display Initializing the Picture Settings You can replace all picture settings with the factory default values. English - 112 Press the SOURCE button to select “PC”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.
  • Page 113 WISELINK...
  • Page 114: Wiselink

    • Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible to any data file damage or data loss. Using the Remote Control Button in WISELINK Menu...
  • Page 115: Using The Wiselink Menu

    Using the WISELINK Menu Alternate method Press the WISE LINK button on the remote control to display a WISELINK menu. Press the MENU button. Press the ENTER button to select “Input”. Press the … or † button to select “WISELINK”, then press the ENTER button.
  • Page 116: Using The Photo (jpeg) List

    WISELINK Using the PHOTO (JPEG) List This menu shows JPEG files and folders saved on an MSC memory device. NOTES • Moving to a photo may take a few seconds to load the file. • This menu only shows files whose file extension is jpg. Files of •...
  • Page 117 Selecting a Photo and Slide Show Complete Steps 1 to 4 of Using the WISELINK Menu. (Refer to page 115) Press the œ or √ button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file.
  • Page 118 WISELINK Press the INFO button during “Slide Show” to set the option(Slide Show Speed, Background Music On/Off, Background Music Setting, List). Press the … or † button to select the option, then press the ENTER button. To change the sub option, press the INFO button again to open the options window and select option you want to change, then press the ENTER button.
  • Page 119 List: The saved file information is displayed as folder or JPEG file. To exit WISELINK mode, press the WISE LINK button on the remote control. Slideshow function information icon Icon Current OSD (Photo) SlideShow Play Photo Pause Volume Up Volume Down Move to Next Photo Move to Previous Photo NOTE...
  • Page 120 WISELINK Rotating NOTES • The rotated file is not saved. • Zoom/Slide Show option is disabled when the Rotate option is English - 120 Complete Steps 1 to 4 of Using the WISELINK Menu. (Refer to page 115) Press the œ or √ button to move to “Photo”, then press the ENTER button.
  • Page 121 Zooming-in Complete Steps 1 to 4 of Using the WISELINK Menu. (Refer to page 115) Press the œ or √ button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. Press the …, †, œ...
  • Page 122 WISELINK • Zoom(x 2): Zoom-in to the photo x2. • Zoom(x 4): Zoom-in to the photo x4. • Zoom(x 1): Restore the photo to its original size. To move to pan up/down/left/right, press the …, †, œ and √ buttons. To exit WISELINK mode, press the WISE LINK button on the remote control.
  • Page 123: Using The Mp3 List

    Using the MP3 List This menu shows MP3 files from among the files saved on an MSC memory device. Complete Steps 1 to 4 of Using the WISELINK Menu. (Refer to page 115) Press the œ or √ button to move to “Music”, then press the ENTER button.
  • Page 124 WISELINK Press the PLAY/PAUSE button while playing an MP3 file to pause the file. Press the STOP button to exit Play mode. To exit WISELINK mode, press the WISE LINK button on the remote control. NOTES • This menu only shows files with the mp3 file extension. Files with other file extensions are not displayed, even if they are saved on the same memory card.
  • Page 125: Using The Setup Menu

    Using the Setup Menu Setup displays the user settings of the WISELINK menu. Complete Steps 1 to 4 of Using the WISELINK Menu. (Refer to page 115) Press the œ or √ button to move to “Setup”, then press the ENTER button. Press the …...
  • Page 126 WISELINK Slide Show Speed: Select to control the slide show speed. You can select Slow, Normal or Fast. Slide Show Repeat: • On: Repeats the slide show from the beginning when all the files in the folder have been displayed. •...
  • Page 127 Appendix...
  • Page 128: Appendix

    2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center. • Caution 1.
  • Page 129 • For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves. Unplug TV, then use a screwdriver to remove the screws. Remove the Lamp cover. Remove the Lamp cover duct holding the locker and pulling it out. Remove the screw securing the Lamp by using a screwdriver.
  • Page 130: Troubleshooting

    Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Problem Poor picture quality. Poor sound quality.
  • Page 131: Cleaning And Maintaining Your Tv

    A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies. Specifications Model HL-S4266W Voltage AC 110-120V 10% Frequency of Operation...
  • Page 132 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center CANADA 1-800-SAMSUNG (7267864) U.S.A 1-800-SAMSUNG (7267864) Web Site Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada www.samsung.com/ca...

This manual is also suitable for:

Hl-s4666wHl-s5666wHl-s5066wHl-s6166w

Comments to this Manuals

Symbols: 0
Latest comments: