Samsung HL-S5065W Owner's Instructions Manual page 105

Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Right click the mouse on the Windows Desktop,
2 Click on Settings, then set the Display Mode with
3 Click on Advanced. A new settings dialog box
4 Click on the Monitor tab, then set the Screen
5 Press the OK button, close the window, then
6 Shutdown the PC, and connect it to your TV.
* The actual screens on your PC may look
* When you use your TV as a PC monitor,
* In this case, the display on the TV may look
* When connecting a PC, you must set it to the
Downloaded from www.Manualslib.com
then click on Properties. The Display Dialog-Box
will be displayed.
reference to the Display Modes Table. You do not
need to change the Colors settings.
will be displayed.
Refresh Rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal
Frequency individually if you can do so, instead
of setting the Screen Refresh Rate.
press the OK button on the Display Registration
Information window. Automatic re-booting may
commence at this moment.
different, depending on your particular version
of Windows and the type of your PC.
it supports Colors up to 32 bits.
different depending on your particular version
of Windows or the PC manufacturer.
display settings that are supported by the TV.
Otherwise, the message Out of input range
will be displayed.
manuals search engine
2
3
4
5
continued...
English - 105