Download  Print this page

Advertisement

Owner's Instructions
HL-S4265W
HL-S5065W
HL-S5665W
HL-S6165W
HL-S6765W
HL-S5055W
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
Downloaded from
www.Manualslib.com
manuals search engine

Advertisement

Table of Contents

   Also See for Samsung HL-S5065W

   Related Manuals for Samsung HL-S5065W

   Summary of Contents for Samsung HL-S5065W

  • Page 1 Owner’s Instructions HL-S4265W HL-S5065W HL-S5665W HL-S6165W HL-S6765W HL-S5055W This device is a Class B digital apparatus. Register your product at www.samsung.com/global/register Downloaded from www.Manualslib.com manuals search engine...
  • Page 2: A Guide To Digital Tv

    A Guide to Digital TV • What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting.
  • Page 3 Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels.
  • Page 4: Table Of Contents

    Table of Contents Your New Wide TV...................8 Viewing Position ......................8 List of Features......................9 Checking Accessories....................9 Right side buttons....................10 Side Panel Jacks ....................10 Front Panel LED Indicators..................11 Rear Panel Jacks ....................12 Remote Control......................13 Connections ...................16 Connecting VHF and UHF Antennas ................16 Antennas with 75-ohm Round Leads ..............16 Connecting Cable TV .....................17 Cable without a Cable Box................17...
  • Page 5 Picture Control ..................60 Picture Control.......................60 Changing the Picture Size..................63 Digital Noise Reduction ..................64 Viewing the DNIe Demonstration ................65 Setting the My Color Control Mode .................66 Using the Color Weakness Enhancement Feature............68 Setting the Film Mode ....................69 Freezing the Picture....................70 Setting the Blue Screen Mode..................71 Sound Control ..................74 Sound Control .......................74 Auto Volume......................76...
  • Page 6 Downloaded from www.Manualslib.com manuals search engine...
  • Page 7 Your New Wide TV Downloaded from www.Manualslib.com manuals search engine...
  • Page 8: Your New Wide Tv

    Your New Wide TV Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches) for ventilation purposes.
  • Page 9: List Of Features

    List of Features Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features: • Easy-to-operate remote control • Easy-to-use on-screen menu system you can access from right side buttons or remote control •...
  • Page 10: Right Side Buttons

    Your New Wide TV Right side buttons The buttons on the right side panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model. Press to switch between viewing TV programs and signals from connected components.
  • Page 11: Front Panel Led Indicators

    Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. The product color and shape may vary depending on the model. HL-S4265W/HL-S5065W/HL-S5665W/HL-S6165W/HL-S6765W POWER Press to turn the TV on and off. Remote Control Sensor Aim the remote control towards this spot on the TV.
  • Page 12: Rear Panel Jacks

    Your New Wide TV Rear Panel Jacks Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two sets of component video input jacks on the rear panel of your TV.
  • Page 13: Remote Control

    16. Mode (TV/DVD/STB/CABLE/VCR) impaired, and has Braille Selects a target device to be controlled by points on the POWER, VOL the Samsung remote control (i.e., TV, DVD, +, VOL -, CH , STOP, STB, CABLE, or VCR). and PLAY/PAUSE buttons.
  • Page 14 Your New Wide TV Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control.
  • Page 15 Connections Downloaded from www.Manualslib.com manuals search engine...
  • Page 16: Connections

    Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. Plug the antenna lead into the ANT 2 IN (AIR) on the rear panel of your TV.
  • Page 17: Connecting Cable Tv

    Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box Plug the incoming cable into the ANT 1 IN (CABLE) on the rear panel of your TV.
  • Page 18: Cable With A Cable Box That Descrambles Some (but Not All) Channels

    Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). Find and disconnect the...
  • Page 19: Connecting A Vcr

    Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack Connect a video cable TV Rear Panel between the VIDEO IN (1 or 2) (or S-VIDEO IN) jack on the TV and the VIDEO (or S-VIDEO) output jack on the VCR.
  • Page 20: Connecting A Camcorder

    Connections Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV. You can use your camcorder to view tapes without using a VCR. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.
  • Page 21: Connecting A Dvd Player

    Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y, P Connect a set of audio TV Rear Panel cables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the DVD player.
  • Page 22: Connecting A Dtv Set-top Box

    Connections Connecting a DTV Set-Top Box TV Rear Panel Connecting to Y, P Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect a set of video cables between the COMPONENT (1 or 2)
  • Page 23: Connecting To Dvi (digital Visual Interface)

    Connecting to DVI (Digital Visual Interface) TV Rear Panel Connect a set of audio cables between the DVI AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect an HDMI/DVI cable between the HDMI 2/DVI IN jack on the TV and the DVI OUT jack on the Set-Top Box.
  • Page 24: Connecting To An Analog Amplifier

    Connections Connecting to an Analog Amplifier TV Rear Panel The AV OUT (AUDIO L/R) terminals cannot be used for external speakers. You must hook them up to an amplifier. When an audio amplifier is connected to the AV OUT (AUDIO L/R) terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the volume...
  • Page 25 Operation Downloaded from www.Manualslib.com manuals search engine...
  • Page 26: Operation

    Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the front panel. Plug & Play Feature When the TV is initially powered On, basic customer settings proceed automatically and subsequently: Setting the language, checking the antenna input, memorizing the channels, and setting the time.
  • Page 27 Plug & Play Press the ENTER button to start the auto program. By default, the cable TV system Selects a cable signal type for your location. is set to “STD”. Start If you want to select another type of cable system, press the œ button and use the …...
  • Page 28 Operation Option 1: Setting the Clock Automatically If you set “Clock Mode” to “Auto” in step 6, follow the instructions below. Plug & Play Press the ENTER button to select “DST”(Daylight Saving Time). Set to daylight saving time. Press the … or † button to select “Off” or “On”, then press the ENTER button.
  • Page 29: Viewing The Menus And On-screen Displays

    Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. You can also view the on-screen menu system and make some adjustments using the TV’s side panel buttons.
  • Page 30: Selecting A Menu Language

    Operation Selecting a Menu Language Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press the √ Game Mode : Off √ V-Chip ENTER button. √ Caption √ Menu Transparency : Medium √...
  • Page 31: Memorizing The Channels

    Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
  • Page 32 Operation Auto Program Press the … or † button to select the Antenna connection, then press the Selects the antenna to execute the Auto Program function. ENTER button. Start • Air : “Air” antenna signal Cable Start Cable : “Cable” antenna signal Air+Cable Start Air+Cable : “Air”...
  • Page 33: Changing Channels

    Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized.
  • Page 34: Customizing Your Remote Control

    Operation Customizing Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. NOTE •...
  • Page 35 Setting Up the Remote to Operate Your Cable Box Turn off your cable box. Press the CABLE button on your TV’s remote control. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the cable box code listed on page 39 of this manual for your brand of cable box.
  • Page 36 Operation Setting Up the Remote to Operate Your DVD Turn off your DVD. Press the DVD button on your TV’s remote control. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the DVD code listed on page 40 of this manual for your brand of DVD.
  • Page 37 Setting Up the Remote to Operate Your Set Top Box Turn off your STB. Press the STB button on your TV’s remote control. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the STB code listed on page 39 of this manual for your brand of STB.
  • Page 38: Remote Control Codes

    Operation Remote Control Codes Brand Code Brand Code SAMSUNG 000 001 002 003 004 005 077 078 079 MITSUBISHI 019 034 041 046 ADMIRAL MONTGOMERY WARD AIWA 002 025 AKAI 004 027 032 MULTITECH 002 005 025 038 AUDIO DYNAMICS...
  • Page 39: Cable Box

    019 021 023 028 VIEWSTAR PIONEER 004 018 020 044 WAMER AMEX 014 022 040 ZENITH 017 029 035 037 045 REGAL SAMSUNG SET-TOP BOX Product Code Code Product Ground wave STB 001 002 Satellite STB HDD COMBO Premium Satellite STB...
  • Page 40 Operation Remote Control Codes SAMSUNG DVD Product Code Product Code 000 001 002 014 015 016 Home Theater VCR COMBO DVDR 003 004 HDD Record COMBO BD Record 005 006 TWIN TRAY COMBO VCR COMBO 007 008 009 010 011...
  • Page 41: Setting The Clock

    Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually Setup Press the MENU button.
  • Page 42 Operation Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Setup Press the MENU button. √ Language : English Press the … or † button to select “Setup”, √ Time then press the ENTER button.
  • Page 43: Setting The On/off Timer

    Setting the On/Off Timer Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √ Game Mode : Off √ V-Chip the ENTER button. √ Caption √ Menu Transparency : Medium √...
  • Page 44: Setting The Sleep Timer

    Operation Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √...
  • Page 45: Viewing An External Signal Source

    Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source Input Press the MENU button. √...
  • Page 46: Assigning Names To External Input Mode

    Operation Assigning Names to External Input Mode This feature enables you to name the input source you have connected. Input Press the MENU button. √ Source List : TV Press the ENTER button to √ Edit Name select “Input”. Move Enter Return Input...
  • Page 47 Channel Control Downloaded from www.Manualslib.com manuals search engine...
  • Page 48: Channel Control

    Channel Control Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and Cable box). Then, when you press the FAV.CH button on the remote control, the TV displays only the favorite channels you previously stored, allowing you to quickly and easily find frequently watched channels.
  • Page 49 To View Your Favorite Channels list: Channel Press the MENU button. √ Antenna : Air Press the … or † button to √ Auto Program select “Channel”, then press √ Channel Manager √ Name the ENTER button. √ Fine Tune √...
  • Page 50: Viewing The Channel Lists

    Channel Control Viewing the Channel Lists You can display a list of all channels or your favorite channels. Preset : To use the Channel Manager function, first run Auto Program (see page 31). Channel Press the MENU button. √ Antenna : Air Press the …...
  • Page 51: Editing The Channel Lists

    Editing the Channel Lists You can edit channels to be added or deleted. Preset : To use the Channel Manager function, first run Auto Program (see page 31). Channel Press the MENU button. √ Antenna : Air Press the … or † button to √...
  • Page 52 Channel Control Channel Manager /Added Press the ▲ or ▼ button to select Air 2 “Delete” to delete a channel, then Air 2 Watch Air 9 Air 16 press the ENTER button; the Air 3 Air 10 Air 4 Delete Air 11 mark will disappear.
  • Page 53: Default List Mode

    Default List mode You can set All, Added or Favorite to be the Default List that appears when you press the CH MGR button. Channel Press the MENU button. √ Antenna : Air Press the … or † button to √...
  • Page 54: Labeling The Channels

    Channel Control Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear below the channel number. Press the CH or CH button to tune to the channel that...
  • Page 55: Fine Tuning Analog Channels Analog

    Fine Tuning Analog Channels Analog Use fine tuning to manually adjust a particular channel for optimal reception. Channel Press the MENU button. √ Antenna : Air Press the … or † button to √ Auto Program select “Channel”, then press √...
  • Page 56: Checking The Digital-signal Strength

    Channel Control Checking the Digital-Signal Strength Digital Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.
  • Page 57: Lna (low Noise Amplifier)

    LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). Channel Press the MENU button. √ Antenna : Air Press the … or † button to √...
  • Page 58 Downloaded from www.Manualslib.com manuals search engine...
  • Page 59: Picture Control

    Picture Control Downloaded from www.Manualslib.com manuals search engine...
  • Page 60: Picture Control

    Picture Control Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard Picture Press the MENU button. √ Mode : Dynamic Press the … or † button to √ Size : 16:9 select “Picture”, then press √...
  • Page 61 Customizing the Picture Settings You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “Color Tone” according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings. Picture Press the MENU button. √...
  • Page 62 Picture Control Mode Press the ENTER button to return to √ Mode : Standard “Mode”. Contrast Press the … or † button to select Brightness Sharpness “Color Tone”, then press the ENTER Color button. Tint (G/R) G50 √ Color Tone : Cool1 Reset Move...
  • Page 63: Changing The Picture Size

    Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. Picture Press the MENU button. √ Mode : Dynamic Press the … or † button to √ Size : 16:9 select “Picture”, then press √...
  • Page 64: Digital Noise Reduction

    Picture Control Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Picture Press the MENU button. √...
  • Page 65: Viewing The Dnie Demonstration

    Viewing the DNIe Demonstration This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to Demo, you can view the applied DNIe and normal pictures on the screen for demonstration purposes. Using this function, you can view the difference in visual quality. Picture Press the MENU button.
  • Page 66: Setting The My Color Control Mode

    Picture Control Setting the My Color Control Mode My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”) without affecting other colors on the screen. Using the Easy Control Menu Picture Press the MENU button.
  • Page 67 Custom Settings Picture Press the MENU button. √ Mode : Dynamic Press the … or † button to √ Size : 16:9 select “Picture”, then press √ Digital NR : On the ENTER button. √ DNIe : On √ My Color Control Press the …...
  • Page 68: Using The Color Weakness Enhancement Feature

    Picture Control Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to enhance the picture according to the user’s particular color weakness. Setup Press the MENU button. √ Language : English Press the … or † button to √...
  • Page 69: Setting The Film Mode

    Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. Picture Press the MENU button. √ Mode : Dynamic Press the … or † button to √ Size : 16:9 select “Picture”, then press √...
  • Page 70: Freezing The Picture

    Picture Control Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound will still be heard.) To cancel this function, press the STILL button again or press any button on the remote control. English - 70 Downloaded from www.Manualslib.com manuals search engine...
  • Page 71: Setting The Blue Screen Mode

    Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen”...
  • Page 72 Downloaded from www.Manualslib.com manuals search engine...
  • Page 73: Sound Control

    Sound Control Downloaded from www.Manualslib.com manuals search engine...
  • Page 74: Sound Control

    Sound Control Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL– button to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound.
  • Page 75 Equalizer Press the œ or √ button to select a particular item to be changed. Press the … or † button to increase or decrease the selected frequency. Press the EXIT button to exit. Balance 100Hz 300Hz 1KHz 3KHz 10KHz Move Adjust Return...
  • Page 76: Auto Volume

    Sound Control Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
  • Page 77: Choosing A Multi-channel Sound (mts) Track Digital

    Choosing a Multi-Channel Sound (MTS) track Digital The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program. Sound Press the MENU button.
  • Page 78: Choosing A Multi-channel Sound (mts) Track Analog

    Sound Control Choosing a Multi-Channel Sound (MTS) track Analog Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. Sound Press the MENU button. √ Mode : Custom Press the … or † button to √...
  • Page 79: Selecting The Internal Mute

    Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On to cut off sound from the TV’s internal speakers. Sound Press the MENU button. √ Mode : Custom Press the …...
  • Page 80: Setting The On/off Melody

    Sound Control Setting the On/Off Melody A melody sound can be set to come on when the TV is powered on or off. Sound Press the MENU button. √ Mode : Custom Press the … or † button to √ Equalizer select “Sound”, then press √...
  • Page 81: Setting Up Dnse (digital Natural Sound Engine)

    Setting up DNSe (Digital Natural Sound engine) DNSe enhances the sound quality, automatically controls output, and prevents sound distortion. Sound Press the MENU button. √ Mode : Custom Press the … or † button to √ Equalizer select “Sound”, then press √...
  • Page 82: Sound Reset

    Sound Control Sound Reset If Game Mode is On (Refer to page 86), the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer to the factory defaults. Sound Press the MENU button. √ Mode : Custom Press the …...
  • Page 83 Special Features Downloaded from www.Manualslib.com manuals search engine...
  • Page 84: Special Features

    Special Features Setting the Function Help Displays Help on the menu functions. Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √ Game Mode : Off √ V-Chip the ENTER button.
  • Page 85: Menu Transparency Level

    Menu Transparency Level Adjusts the transparency of the menu screen. Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √ Game Mode : Off √ V-Chip the ENTER button. √...
  • Page 86: Using Game Mode

    Special Features Using Game Mode When connecting to a game console such as PlayStation or Xbox , you can enjoy a more realistic gaming experience by selecting the game mode to on. Setup Press the MENU button. √ Language : English Press the …...
  • Page 87: Using The V-chip

    Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (you can change it later, if necessary). How to Change Your Password Setup Press the MENU button.
  • Page 88 Special Features How to Enable/Disable the Rating Controls Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √ Game Mode : Off √ V-Chip the ENTER button. √...
  • Page 89 How to Set up Restrictions Using “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: “TV Parental Guidelines” or “MPAA Rating”. Setup Press the MENU button. √ Language : English Press the … or † button to √...
  • Page 90 Special Features TV Parental Guidelines You can independently lock the TV ratings. The locked TV (FCC) ratings are ALL FV Allow All TV-Y indicated by the symbol “ ”. TV-Y7 Block All TV-G To unlock a locked channel, press the TV-PG TV-14 ENTER button again.
  • Page 91 How to Set up Restrictions Using “MPAA Rating” The Movie rating system uses “MPAA” (Motion Picture Association of America) system, and its main application is for movies. When the rating control is on, the TV will automatically block any programs that are coded with objectionable ratings (either “MPAA Rating”...
  • Page 92 Special Features Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-G General audience. It contains little or no violence, no strong language, and little or no TV-MA sexual dialog or situations. Mature audiences only.
  • Page 93 How to Set up Restrictions Using Canadian English Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √ Game Mode : Off √ V-Chip the ENTER button. √...
  • Page 94 Special Features Canadian English Press the … or † button to select a appropriate restriction. Block Allow All Block All Press the ENTER button to activate the restriction selected. “ ” symbol is indicated. To unlock a locked channel, press the ENTER button again.
  • Page 95 How to Set up Restrictions Using Canadian French Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √ Game Mode : Off √ V-Chip the ENTER button. √...
  • Page 96 Special Features Canadian French Press the … or † button to select a appropriate restriction. Block Allow All Block All Press the ENTER button to activate the 8 ans + restriction selected. 13 ans + 16 ans + “ ” symbol is indicated. 18 ans + To unlock a locked channel, press the ENTER button again.
  • Page 97: Using The V-chip For Digital Channels

    Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √ Game Mode : Off √...
  • Page 98 Special Features Rating title The number of Downloadable U.S. Rating You can independently lock the TV current rating Violence Level √ ratings. The locked TV ratings are title Allow All indicated by the symbol “ ”. The number of Block All To unlock a locked channel, press the all rating title ENTER button again.
  • Page 99: Viewing Closed Captions (on-screen Text Messages)

    Viewing Closed Captions (On-Screen Text Messages) Analog The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Setup Press the MENU button. √...
  • Page 100 Special Features Caption Press the … or † button to select “Caption Mode”, then press the ENTER Caption : On Caption Mode : Default Default button. Caption Options Press the … or † button to select submenu (CC1~CC4 or Text1~Text4) you want, then press the ENTER button.
  • Page 101: Viewing Closed Captions (on-screen Text Messages)

    Viewing Closed Captions (On-Screen Text Messages) Digital The Digital Captions function operates on digital channels. Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √ Game Mode : Off √...
  • Page 102 Special Features Caption Press the … or † button to select “Size”, √ Size : Default then press the ENTER button. √ Font Style : Default Press the … or † button to select one you √ Foreground Color : Default √...
  • Page 103 PC Display Downloaded from www.Manualslib.com manuals search engine...
  • Page 104: Pc Display

    PC Display Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. Connecting a PC (15p D-SUB) to the TV TV Rear Panel Connect a PC cable between the PC Output jack on the...
  • Page 105 PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Right click the mouse on the Windows Desktop, then click on Properties.
  • Page 106 PC Display Display Modes Mode Resolution Horizontal Frequency [KHz] Vertical Frequency [Hz] Pixel Clock [MHz] Sync Polarity (H/V) 640 x 350 31.47 70.00 25.175 720 x 400 31.47 70.00 28.322 640 x 480 31.47 60.00 25.175 35.00 66.70 30.24 37.86 72.80 31.50 37.50...
  • Page 107: Adjusting The Picture Quality

    Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen. Press the SOURCE button to select “PC”.
  • Page 108: Changing The Picture Position

    PC Display Changing the Picture Position After connecting the TV to your PC, adjust the position of picture if it is not well-aligned. Press the SOURCE button to select “PC”. Setup Press the MENU button. √ Language : English Press the … or † button to √...
  • Page 109: Adjusting The Picture Quality And Position Automatically

    Adjusting the Picture Quality and Position Automatically This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. Press the SOURCE button to select “PC”. Setup Press the MENU button. √...
  • Page 110: Changing The Picture Size (pc Mode)

    PC Display Changing the Picture Size (PC Mode) You can select the picture size which best corresponds to your viewing requirements. Press the SOURCE button to select “PC”. Picture Press the MENU button. √ Mode : Dynamic Press the … or † button to √...
  • Page 111: Viewing The Current Resolution

    Viewing the Current Resolution You can get the resolution information of your PC. Press the SOURCE button to select “PC”. Setup Press the MENU button. √ Language : English Press the … or † button to √ Time select “Setup”, then press √...
  • Page 112: Initializing The Picture Settings

    PC Display Initializing the Picture Settings You can replace all picture settings with the factory default values. Press the SOURCE button to select “PC”. Setup Press the MENU button. √ Language : English Press the … or † button to √...
  • Page 113 Appendix Downloaded from www.Manualslib.com manuals search engine...
  • Page 114: Appendix

    2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center. • Caution 1.
  • Page 115 • For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves. Unplug TV, then use a screwdriver to remove the screws. Remove the Lamp cover. Remove the Lamp cover duct holding the locker and pulling it out. Remove the screw securing the Lamp by using a screwdriver.
  • Page 116: Troubleshooting

    Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Problem Possible Solution Poor picture quality.
  • Page 117: Cleaning And Maintaining Your Tv

    If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world. A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies. Specifications Model HL-S4265W HL-S5065W HL-S5665W HL-S6165W HL-S6765W HL-S5055W Voltage...
  • Page 118 This page is intentionally left blank. Downloaded from www.Manualslib.com manuals search engine...
  • Page 119 This page is intentionally left blank. Downloaded from www.Manualslib.com manuals search engine...
  • Page 120 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site Address Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2...

This manual is also suitable for:

Hl-s4265wHl-s5055wHl-s5665wHl-s6165wHl-s6765w

Comments to this Manuals

Symbols: 0
Latest comments: