U
SB Port
Power Button
Rear Panel
T
he rear panel of the N299 houses the USB and Ethernet connections, as well as
the po
wer connector. See the table below for descriptions of each:
Item
Power Connector
WAN Port
LAN Port
USB Ports
NOTE
o Blinking red (5 seconds): USB device connecti
•
D
ata Transfer
o Blinking blue: Active data transfer
o Blinking red: U
•
USB 2.0 port for USB storage expansion.
•
Power on/off N299
Description
•
Connect the inclu
ded power cord to this connector
•
WAN port for connecting to an Ethernet network through a
switch or router
•
LAN port for connecting to an Ethernet network through a switch
or router
•
USB 2.0 ports for storage expansion
There are two USB ports at the back panel
of N299, you can use either one, but not
two at the same time.
SB device read/write error
11
on failure