Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On-Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
1
2
3
4
5
Icon
Control
Microphone Mute/Un
mute Control
DDC-CI
Exit
Call Answer/End
Increase/Right
Speaker mute control
Decrease/Left
Menu
Enter
Volume Up/Down
Description
Turn on/off the integrated microphones
Press and hold for 10 seconds to enable or disable the
DDC-CI function
Exit and return to previous level
Answer/end Lync Call
Right browsing key
For increasing the value on adjustment bar/tune in
Press to move to next item
Turn on/off the speaker
Left browsing key
For decreasing the value on adjustment bar/tune in
Press to move to last item
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/un-lock
menu
Press to enter next level on main menu/sub menu status
or enter previous level on adjustment bar
Press to control Speaker Volume up/down
2-3
Chapter 2.