Installing The Monitor Driver In Windows 8.1; Getting Further Help - Lenovo LI2821wA User Manual

Installing the monitor driver in Windows 8.1

To use the Plug and Play feature in Microsoft Windows .1, do the following:
1. Turn of f the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows .1 operating system.
.
and
.
.
click
. Click the Change the display settings tab.
. Click the Advanced Settings icon.
. Click the Monitor tab.
. Click the Properties button.
. Click the Driver tab.
1 . Click Update Driver, then click Browse the computer to find the driver program.
1 . Select Pick from the list of device driver program on the computer.
1 . Click the HaUG Disk button.
:
X:\Monitor Drivers\Windows 8.1
(where X the
.
1 . Select the "lenli2821wa.inf" file and click the Open button. Click the OK button.
1 .
1 .
1 . Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at 60 Hz(VGA),3840 x 2160 at 30Hz(HDMI),
3840 x 2160 at 60Hz(DP) or 640 x 480 at a refresh rate of 60 Hz.

Getting further help

If you still can't solve your problem, please contact the Lenovo Support Center. For more
information on contacting the Support Center, please see
page A-1.
the
lick the Browse button
elect LEN LI2821wA and click Next.
and
windows.
Appendix A."Service and Support"on
Chapter 3.
.
to the following
3-7