Accessing And Navigating - GE Security Legend Quick Manual

Accessing and navigating the menus
If passcodes were turned on during installation (or later), access to the menus of the graphical
programming interface will be passcode-protected. Otherwise, you will be taken directly to the
main menu. For details about passcodes, see the installation and user manuals.
Accessing the menus
1. Starting at the keypad (a GE KTD-405
keypad), press and hold the set (
until you hear a beep and the programming
code display appears on the keypad's LCD.
2. Press the 9, 5, 1, and seq (
3. Press 3 on keypads of version 1.2.09 or later
to select CAMERA. If using a keypad of
version 1.1.06 or earlier, press 3 on the first
screen to select CAMERA/RCVR, then press 1
to select CYBERDOME on a second screen.
4. Enter the dome's 4-digit camera site number
(fewer digits with older keypads). See TIPS.
The joystick now becomes a simulated
mouse and drives a cursor on the monitor
screen over the menus of the graphical
programming interface.
5. If passcodes are turned on, select your
passcode level and enter your passcode.
If passcodes are not turned on, you will be
taken directly to the main menu.
You can now access any programming
parameters allowed by your passcode.
5 | Accessing and navigating the menus
) key
) keys.
seq
TIPs
•
The Legend protocol supports all of
the common commands of other
manufacturers' keypads and protocols,
such as PelcoD, Ultrak, Impac/485, and
ASCII.
•
To verify your keypad's version, press
and hold the mon key until the keypad
beeps, then press the key.
•
You can either enter the camera site
number with the preceding zeros (such
as 0003), or you can enter the camera
number without the preceding zeros
(such as 3) and press set (
Note: Later keypad versions allow 4-digit camera
site numbers, while earlier keypad versions
allow 2- or 3-digit numbers.
•
You can either enter passcodes by
pressing number keys on the keypad or
by opening the keyboard in the program-
ming interface. Selecting the ab icon
opens the keyboard. Pressing the esc key
clears numbers entered from the keypad.
).