Table of Contents
Advertisement
Turning the fan on s
^ Press the On/Off sensor button s.
The fan turns on at power level 2.
The On/Off button s and the 2 button
light up.
Selecting the fan power level
Depending on the intensity of the
cooking vapors, levels 1 through 3 are
usually sufficient for normal cooking.
^ Use the buttons 1, 2 or 3 to select the
desired power level.
Intensive setting
^ To remove intensive vapors or odors,
for example when frying or cooking
for with a strong aroma, select
intensive power level 4.
Automatically switching back from
the intensive setting
The intensive level can be programmed
to automatically switch back to level 3
after 10 minutes.
^ Turn the fan and the overhead
lighting off.
^ Press and hold the delayed shut
down button m for approx. 10
seconds, the 1 sensor button lights
up.
^ Press the following buttons one after
another:
– the overhead lighting sensor button
n,
– the 1 sensor button, and
– the overhead lighting sensor button
n again.
If the sensor buttons 1 and 4 flash,
automatic switch-back is not activated.
^ Press the 4 button to activate
automatic switch-back. The sensor
buttons 1 and 4 will light
continuously.
Press the 1 sensor button to
deactivate.
^ Confirm your selection by pressing
the delayed shut down sensor m.
If the setting is not saved within 4
minutes, the old setting is retained.
If the procedure is not confirmed
within 4 minutes of programming the
hood will automatically default to the
previous setting.
Operation
11
Advertisement
Table of Contents
