Cannot Find Access Point From Settings - Buffalo LPV4-U2-300S User Manual

Case 3: Using a PC with multiple network interfaces.
Open Network-USB Navigator and options menu. Click Search for Device Servers tab and check Enable broadcast
addresses, then add broadcast addresses of the network that the print server is connected to.

Cannot Find Access Point from Settings

Case 1: The access point is turned off.
Confirm that the access point is turned on.
Case 2: The access point has SSID broadcasting disabled.
You will never find the access point if it disables broadcasting SSID. Navigate to Network - Wireless LAN - Advanced
Settings and configure manually.
Case 3: The access point sets the authentication method as WPA2-PSK (TKIP).
WPA2-PSK (TKIP) is not supported.
51