Print Server Is Not Displayed On Network-Usb Navigator - Buffalo LPV4-U2-300S User Manual

Print Server Is Not Displayed on Network-USB Navigator

Case 1: The IP address is invalid.
If print server was assigned an invalid IP address, Settings cannot be accessed. If you cannot open Settings, initialize the
print server, which restores all settings to factory default.
Case 2: Print server is not connected correctly.
Check the LEDs on the side of the print server. If it is connected correctly, the LEDs will be lit as shown below.
For wired connection:
For wireless connection:
Note: If the LAN LED is not lit while an Ethernet cable is connected, check the router and its connection.
50