Wireless Lan Settings (Wps Settings) - Buffalo LPV4-U2-300S User Manual

WEP Key 1
WEP Key 2
WEP Key 3
WEP Key 4
WPA/WPA2 Settings
Encryption Method
Pre-shared Key

Wireless LAN Settings (WPS Settings)

Configure WPS here.
Network - Wireless LAN - WPS Settings
PIN
Up to 4 WEP keys can be configured. Alphanumeric or hexadecimal WEP keys
of either 64-bit or 128-bit lengths are supported.
Select the encryption method for WPA authentication (TKIP or AES). This
setting should match that of the access point.
Note: Usually, AES is safer than TKIP. Always use AES for your wireless network
if it is supported by your devices.
Enter the pre-shared key. This is needed when TKIP or AES is used for
encryption. Use the same key that your access point and other wireless
devices are using. Use 8 - 63 alphanumeric or hexadecimal characters.
Displays PIN for WPS connection. Click Generate PIN to generate new PIN.
To connect to the access point, click Execute WPS and enter the PIN to the
access point within 2 minutes.
19