Cannot Access Print Server From Pc - Buffalo LPV4-U2-300S User Manual

Case 3: Connected to the printer using Network-USB Navigator.
If the printer is connected to Network-USB Navigator, you cannot print. Disconnect the printer from Network-USB
Navigator. Also, confirm that automatic connection is disabled.
Case 4: Hostname has been changed.
If you changed the print server's hostname, you have to reconfigure the printer port. Refer to the "How to Reconfigure
Printer Port" section.

Cannot Access Print Server from PC

Case 1: Print server is not connected correctly.
Check the LEDs on the side of the print server. If it is connected correctly, the LEDs will be lit as shown below.
For wired connection:
For wireless connection:
Note: If the LAN LED is not lit while an Ethernet cable is connected, check the router and its connection.
47