Sony KDF-46E2000 Service Manual page 43

BOTTOM BLOCK WIRE DRESSING CAUTION POINTS
Before installing chassis Dress CN3004[B],
CN8400[U], and CN3008[B] to purse lock on
bottom block as shown.
After dressing Speaker Wire, HA/HB Connector Assy
and HC Connector assy to Bottom Block.
REMOVE as much excess slack in wires and dress to
Purse Lock.
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
Loop Video 2 Connector before installing
into Purse Locak as shown to avoid
Connector assy from Touching [K] Board
Heat Sink.
ONLY FOR 46" and 50" models
Ensure no excess wire is hanging loose in
this area.
THIS IS VERY IMPORTANT TO AVOID
NOISE DUE TO SPEAKER VIBRATION
43