Advertisement
www.cembre.com
Cembre S.p.A.
Cembre Ltd.
Via Serenissima, 9
Dunton Park
25135 Brescia (Italia)
Kingsbury Road, Curdworth - Sutton Coldfield
Telefono: 030 36921
West Midlands B76 9EB (Great Britain)
Telefax: 030 3365766
Tel.: 01675 470440 - Fax: 01675 470220
E-mail: info@cembre.com
E-mail: sales@cembre.co.uk
www.cembre.it
www.cembre.co.uk
Cembre España S.L.
Cembre AS
Calle Verano, 6 y 8 - P.I. Las Monjas
Fossnes Senter
28850 Torrejón de Ardoz - Madrid (España)
N-3160 Stokke (Norway)
Teléfono: 91 4852580
Phone: (47) 33361765
Telefax: 91 4852581
Telefax: (47) 33361766
E-mail: info@cembre.es
E-mail: cembre@cembre.no
www.cembre.es
www.cembre.no
Cembre S.a.r.l.
22 Avenue Ferdinand de Lesseps
91420 Morangis (France)
Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10
B.P. 37 - 91421 Morangis Cédex
E-mail: info@cembre.fr
www.cembre.fr
Cembre GmbH
Cembre Inc.
Heidemannstraße 166
Raritan Center Business Park
80939 München (Deutschland)
181 Fieldcrest Avenue
Telefon: 089/3580676
Edison, New Jersey 08837 (USA)
Telefax: 089/35806777
Tel.: (732) 225-7415 - Fax: (732) 225-7414
E-mail: info@cembre.de
E-mail: Sales.US@cembreinc.com
www.cembre.de
www.cembreinc.com
Certified Quality
Certified Environmental
Management System
Management System
BATTERY OPERATED
HYDRAULIC CRIMPING TOOL
B54-YD6
B54-YD6-8
B54-YK
OPERATION AND MAINTENANCE
MANUAL
12 M 025 U
12 M 025 U
ENGLISH
Certified Occupational
Health & Safety
Management System
Advertisement
Table of Contents
Related Manuals for Cembre B54-YD6
Summary of Contents for Cembre B54-YD6
- Page 1 OPERATION AND MAINTENANCE E-mail: info@cembre.com E-mail: sales@cembre.co.uk E-mail: info@cembre.fr www.cembre.it www.cembre.co.uk www.cembre.fr MANUAL Cembre España S.L. Cembre AS Cembre GmbH Cembre Inc. Calle Verano, 6 y 8 - P.I. Las Monjas Fossnes Senter Heidemannstraße 166 Raritan Center Business Park 28850 Torrejón de Ardoz - Madrid (España) N-3160 Stokke (Norway) 80939 München (Deutschland)
- Page 2 WARNING MOD. CB9630H 9,6V - 3,0Ah Ni-MH Ni-M H TG0702 Before using the tool, carefully read the instructions in this manual. CDD6-8 jaw When operating the tool, keep hands away from the danger zone. See page 9. Do not short circuit the batteries. Always recycle the batteries.
- Page 3 TABLE 3 (JAW) Code N° Item DESCRIPTION B54-YD6 with D3 groove to accept all "W" style crimping dies Ø + "BG" fi xed groove CDD6 CDD6-8 CDK B54-YD6-8 -YD6-8 with D3 groove to accept groove to accept all "W" style crimping dies tyle crimping dies + "O"...
-
Page 4: General Characteristics
BATTERY OPERATED HYDRAULIC CRIMPING TOOL TABLE 2 (ITEM 10) 1. GENERAL CHARACTERISTICS B54-YD6 B54-YD6-8 B54-YK TOOL TYPE: Application range: suitable for installing electrical compression connectors for conductors up to 150 mm (300 MCM) Crimping force kN (sh ton): 54 (6) - Page 5 2. INSTRUCTIONS FOR USE The tool is equipped with automatic return of the dies once the crimping operation is completed. The interchangeable crimping jaws have thermoplastic rubber covers on outside edges. Residual battery capacity level is automatically displayed after every cycle. The part reference “B54...”...
- Page 6 2.3) Compression TABLE 2 (ITEM 10 IN TABLE 1) Insert the conductor in to the connector and press the operating button (3): the ram will gradually move forward until the two dies touch. It is recommended to keep operating Code N° Item DESCRIPTION until the maximum pressure valve is activated and a "click"...
- Page 7 TABLE 2 (ITEM 10 IN TABLE 1) 2.8) Crimping die assembles 2.8.1) Use of ”W” style crimping dies (B54-YD6, B54-YD6-8 tools) Code N° Item DESCRIPTION – Press pins (2) and insert “W” dies into their seats (see Fig. 4A). – To disassemble them simply press the pins and to slip them from the jaws.
- Page 8 CBA96-144 required for 9,6V bat- teries (eg. CB9630H) (see Fig. 6). With the adaptor removed, the same charger may be used with the 14,4V batteries (eg. CB1430H) common to the other Cembre battery operated tools. Serial number of tool Adapter CBA96-144...
-
Page 9: Maintenance
3. WARNING TABLE 1 Before starting work on electrical equipment, please ensure that either there are no live parts in the immediate working area or that precautions are taken for working near live parts in accordance with EN50110-1. See TABLE 2 O NOT USE THIS TOOL ON OR NEAR ENERGISED CONDUCTORS WITHOUT PROPER PERSONAL PROTECTIVE EQUIPMENT AILURE TO OBSERVE THIS WARNING COULD... -
Page 10: Spare Parts List
Centre; if possible, attach a copy of the Test Certifi cate supplied by Cembre together with the tool or, if no other references are available, indicate the approximate purchase...
Need help?
Do you have a question about the B54-YD6 and is the answer not in the manual?
Questions and answers