Electrical Connections - Lennox AQUALEAN AWC Application Manual

GENERAL CHARACTERISTICS

1.5.- ELECTRICAL CONNECTIONS.

1 - Power supply
2 - Power supply with electrical heater (units 007 to 020).
3 - Connection control.
FOR ELECTRICAL CONNECTION REFER TO WIRING DIAGRAM IN THE UNIT.
MODEL
AWH 002 / AWH 003
AWC/H 007 - AWC/H 008
AWC/H 010
AWC/H 012
AWC/H 015
AWC/H 018 - AWC/H 020
Local and national legislation has to be taken into account when the unit will be installed.
INSTALLATION GUIDE FOR CONTROL CABLE (TO AVOID INTERFERENCES):
• Use the screened 15 m cable supplied with terminal (3 wires + screen).
• Wire the cable separated from electrical power wiring by a physical distance of 500 mm.
• Wire the cable separated from halogen lamps/fl uorescent tube lighting... by a phyisical distance of 500 mm.
• Wire the cable separated from radio frequency sources such as radio transmitter... at least 500 mm.
NEVER WIND THE REMAINING CABLE AROUND, CUT THE CABLE BY THE TERMINAL END.
AQUALEAN - AWC/AWH - MIL118E-1407 / 10-2013
VOLTAGE
50Hz
1
230V / 1Ph 3 x 1,5 mm²
230V / 1Ph 3 x 2,5 mm²
230V / 1Ph 3 x 6 mm²
230V / 1Ph 3 x 6 mm²
400V / 3Ph+N 5 x 2,5 mm²
400V / 3Ph+N 5 x 2,5 mm²
400V / 3Ph+N 5 x 4 mm²
EH
WIRE NUMBER AND SECTION
2
-
3 x 10 mm²
3 x 16 mm²
3 x 16 mm²
5 X 1 mm² shielded
5 x 6 mm²
5 x 6 mm²
5 x 10 mm²
sc
3
E.Box
2
1
3
• 7 •