User Programs - AKA T72 Operating Manual

It should be remembered that increasing the value of the filtering level increases the comfort of the
search, but it can lead to missing deep or highly conductive targets.
The value of the filtering level should be selected experimentally for each particular detecting
situation as it is desirable to keep this setting as low as possible while still maintaining a comfortable
search level.
RATE MM-Not fully described. This adjusts the setting for the algorithm for targets spaced close
together. This may be set experimentally. Current setting of 5 is recommended.
EMI FILTER MM- not fully described. However it appears to be self-explanatory.

USER PROGRAMS

The device provides the ability to edit and save 4 independent search programs. In each program, the
user may choose to set the value of any of the available options.
To switch between user programs press PROG button. The currently selected program is displayed in
the lower right hand corner of the display. The factory setting values for all 4 programs are shown in
the table below.
Settings: Backlight, Contrast and Cont. CT directly with the search capabilities of the device are not
affected, and can be chosen based on the preferences of the particular user.
However, one should pay attention to two points:
-Unless absolutely necessary, do not place a high value for the Backlight setting, Doing so may reduce
the operation time with one set of batteries.
21