Table 16 lists the rack types supported on the R220.
Rail
Product
identifier
A4
R220
A6
For detailed information about static rails, see the Rack rail specifications section in Appendix A:
Additional specifications. For more information on installing the R220 in a rack, see the
Installation Instructions
Cable management arm
The static rails for the R220 support a wide variety of racks and mounting configurations but do not
support the ability to extend the system out of the rack for service and do not provide support for a
cable management arm (CMA).
28 Dell PowerEdge R220 Technical Guide
Table 16.
Mounting interface
ReadyRails
ReadyRails
on
Dell.com/Support/Manuals.
Supported rack types
Rail type
Square
Static
Static
Rack types supported
4-post
2-post
Round
Thread
Flush
Rack
Center