Real Time Clock; Internal Display Panel - Toshiba Satellite C50-B Series User Manual

Real Time Clock

Problem
The BIOS setting
and system date/
time are lost.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the
Problem
Output to screen is
garbled

Internal display panel

Apparent computer's display panel problems may be related to the
computer's setup and configuration.
Problem
No display
User's Manual
Procedure
The lasting time of the Real Time Clock (RTC) has
run out - you will need to set the date and time in
the BIOS setup utility by using the following steps:
1. Click Start. Point to the arrow (
Shut down button and then select Restart.
2. Hold down the F2 key and then release this
key one second after the computer is power
on - the BIOS setup utility will load.
3. Set the date in the System Date field.
4. Set the time in the System Time field.
5. Press F10 - a confirmation message will be
displayed.
6. Select Yes - the BIOS setup utility will end
and the computer will restart.
The Keyboard
Procedure
Please refer to your software's documentation to
ensure that it is not remapping the keyboard in any
way (remapping involves changing or reassigning
the function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
Procedure
Press the function keys to adjust the display
priority, and to make sure it is not set for output to
an external monitor.
) beside the
section for further information.
6-6