Accessories; Mounting Accessories; Operating Accessories - Projecta projection screens Instructions For Use Manual

9. Accessories

EN
Accessories help you to simplify the mounting and/or the operation of a projection
screen. For further information, please contact your supplier or Projecta b.v. or visit
our website: www.projectascreens.com.

9.1. Mounting accessories

Ceiling brackets
Special ceiling brackets are available for mounting a projection screen in a high room
or under a recessed ceiling. These brackets are 100 cm in length and may be
shortened as needed.
Wall brackets
In certain cases, it may be desirable to mount the projection screen a slight distance
from the wall. For example if the projection screen is to be hung in front of a
painting, or in order to prevent image distortion in cases where the projection screen
fabric has to be placed at an angle for overhead projection applications. See also 'Wall
clamps'.
Wall clamps
The projection screen fabric may also be secured at an angle using wall clamps.
To do this, the slat bar may be simply clicked into the wall clamp.

9.2. Operating accessories

Infrared (IR) remote control
The infrared driven remote control consists of a surface-mounted outlet with infrared
receiver and hand transmitter.The surface-mounted socket must be connected to the
projection screen. The infrared receiver must be mounted so that it is visible to the
eye of the remote control. Using the remote control, the projection screen may be
operated from a distance of up to 7 meters.
Radio frequency (RF) remote control
The radio frequency remote control is a two-piece set consisting of a control module
and a hand transmitter.The control module must be connected to the projection
screen. Using the hand transmitter, the projection screen may be operated from a
distance of up to 30 meters.
19