Switching On The Display; Switching Off The Display; Battery Warning And Battery Alarm - Uwatec Aladin ONE Operating Manual

2 Operation

2.3 Switching on the display

DEPTH DIVE TIME
NO
AMPM DESAT
NO STOP
DECO
STOP
STOP
CNS O %
2
S
L
O
W
Time of day display
DEPTH
DIVE TIME
NO
NO
Logbook information

2.4 Switching off the display

2.5 Battery warning and battery alarm

Flashing battery alarm
8
• automatically, on submerging in water or when adaptation to atmospheric
pressure is necessary;
• manually, by "bridging" the water contacts with a moistened finger.
Afterwards the display shows the time of the day, the O
ture. This display is called time of day display.
If there is a remaining saturation from the last dive, Aladin
logbook information of the last dive (depth, dive time, temperature, O
surface interval, the "do not dive" icon (if applicable) and the residual nitrogen
loading as a bar graph ->18.
If there is a remaining saturation from a change of altitude, Aladin
the mountain symbol, the adaption time as a bar graph and the time interval
since the change in altitude class.
WARNING
When Aladin ONE is in state of rest no information is displayed but the atmo-
®
spheric pressure is continuously monitored. If a change in altitude range is
detected, Aladin ONE switches on for 3 minutes automatically ->20.
®
On the surface Aladin
operation.
When the computer senses that the battery needs to be replaced, the steady
battery symbol appears at first (warning). This allows you to do some more
dives, but you should change the battery as soon as possible.
When the battery reaches a dangerously low level, the battery symbol starts
to blink (alarm).
WARNING
The battery condition can be checked with SmartTRAK.
The temperature influences the battery performance. In cold water it is lower
than in warm water. If the battery shows the steady battery symbol on the
surface, it is possible for it to start flashing during the dive.
Aladin ONE does not display a No-Fly time. To pre-
®
vent decompression sickness or death, you must
wait at least 24 hours after your last dive before
flying.
ONE switches off automatically after 3 minutes without
®
• Risk of computer malfunction!
The battery symbol blinks, on the surface and in
dive mode, to alert the diver of a dangerous situ-
ation: the battery may not have enough energy
to finish a dive.
Do not dive or finish the dive and replace the
battery ->21.
• Replace the battery when the steady battery
symbol appears ->21!
mix and the tempera-
2
ONE displays the
®
%), the
2
ONE displays
®
II UWATEC Aladin
ONE
® ®