Privacy Masking Zones; Sensor Settings - Abus CASA20550 User Manual

„Brightness, Contrast, Saturation, Sharpness":
Here you can optimize the video imiage depeding on the situation.
In order to see the changed settings click the „Preview" button. To change the settings press the "Save"
button. In order to discard the settings press the „Restore" button.

9.2 Privacy masking zones

This function allows you to hide areas
in the video image. You can select 5
areas of any size.
Enable this function by selecting the
"Enable privacy mask" option.
Click "New" to create a new window;
you can then adjust the size. Click
"Save", to apply the changes.

9.3 Sensor settings

Here you can change different settings
regarding the CMOS sensor of the
network camera.
„Maximum Exposure Time": The shorter
the exposure time is set the less light hits
the sensor and the darker the image gets.
The sharpness during fast movements
decreases the longer the exposure time is
set.
„Exposure level": Here you can set the
default aperture. The higher the value the
brighter the video image.
„Max. gain": With this setting it is possible to show more details during low light conditions In dark rooms a
better performance can be achieved.
„Enable BLC": Backlight compensation (BLC) improves the display of objects in front of different light
conditions.
Usage of Sensor profiles:
The network camera supports different sensor profiles, depending on situation or time. Next to the standard
profile following can be configured:
•
Day:
•
Night:
Use this profile if the network camera is installed at a location with permanent
daylight conditions.
Use this profile if the network camera is installed at a location with permanent low
light conditions.
81
English