Abus CASA20550 User Manual page 288

Syntax:
http://<servername>/cgi-bin/operator/uartchannel.cgi?[channel=<value>]
------------------------------------------------------------------------- GET /cgi-
bin/operator/uartchannel.cgi?[channel=<value>]
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache
------------------------------------------------------------------------- POST /cgi-
bin/operator/uartchannel.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled pragma
: no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT
User must use GET and POST to establish two channels for downstream and upstream. The x-sessioncookie in the GET
and POST should be the same to be recognized as a pair for one session. The contents of upstream should be base64
encoded to be able to pass through some proxy server.
This channel will help to transfer the raw data of UART over network.
PARAMETER VALUE
channel 0 ~ (n-1)
Event/Control HTTP tunnel channel
Note: This request requires
Method: GET and POST
Syntax:
http://<servername>/cgi-bin/admin/ctrlevent.cgi
------------------------------------------------------------------------- GET /cgi-
bin/admin/ctrlevent.cgi
DESCRIPTION
The channel number of UART.
admin privilege
288