Table of Contents
Advertisement
Attaching the control panel
Insert the right side of the control panel into the main unit.
Note: the control panel must be attached into the T-Joint.
Press the control panel on to the left side of middle of
it until a click sound is heard.
Caution:
DO NOT insert the control panel from the left side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful
not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not
to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton
swab soaked in isopropyl alcohol to clean the socket on the back of the control panel.
6
Advertisement
Table of Contents
