General Operation - Hyundai EXCELLENCE H-CDM8030 Instruction Manual

General operation

Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press OPEN button on the panel to open the panel and press the RESET buttont to restore the unit to the original
factory settings.
Power button
Press PWR button to turn the unit on.
Press it to switch the unit off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the
unit on it will resume the stored status which you set.
Volume control
Volume adjust
Rotate the VOL knob on the panel or press the V +/- on the RC to adjust the volume level.
Setting the sound characteristics
Press shortly and repeatedly the SEL button to select the audio setting: VOLUME => BASS => TREBLE =>
BALANCE => FADER. Rotate the VOL knob to regulate each setting.
Note:
If turning off the power all the settings of each mode will be saved.
If turning off the ACC power all the settings will become as they were set on the plant as current.
If you don t adjust VOL knob within 3 seconds after selecting the desired setting, the unit will automatically
return to the current mode being displayed.
15