Table of Contents
Advertisement
Setting other characteristics
During FM mode, keep pressing SEL button for 2 seconds to enter another mode. Shortly and repeatedly press the
SEL button to select the setting: DSP => IN VOL => STEREO => LOC => LOUD => CT => TA VOL => EON
=> PTY.
a.
DSP mode: select the following equalizer modes by rotating the VOL knob: NONE => CLASSIC => ROCK
=> POP => FLAT.
b. IN VOL mode: rotate the VOL knob to define default volume level when the unit is on.
c.
STEREO: rotate the VOL knob to select: STEREO or MONO.
d. LOC mode: select the radio broadcasting by rotating the VOL knob: LOCAL => DISTANCE.
e.
LOUD mode: rotate the VOL knob to select: LOUD ON or LOUD OFF.
f.
CT mode: set the time by rotating the VOL knob.
g. TA VOL mode: adjust the TA volume level by rotating the VOL knob.
h.
EON mode: select EON ON or EON OFF by rotating the VOL knob.
i.
PTY mode: select PTY ON or PTY OFF by rotating the VOL knob.
Turning the sound off
Press the MUTE button to turn the sound off. Press it again to turn the sound on.
Mode setting
Press the MODE button repeatedly to select TUNER => CD => SD/MMC (if the SD/ MMC card is inserted) =>
USB (if the USB device is inserted) => NAND => AUX.
If you select TUNER mode, press BAND button once or more to select: FM1, FM2, FM3, MW1, MW 2.
16
Advertisement
Table of Contents
