Hyundai EXCELLENCE H-CDM8030 Instruction Manual page 19

The RDS program will be automatically searched and received. After turning on, if the RDS signal is week or
even no signal, the unit will search another frequency with this RDS program.
Default setting is ON.
Region mode: Press and hold AF/REG button for 2 seconds, the unit will be under REGION ON or REGION
OFF mode:
- REGION ON: PI code will be searched during AF searching. The display will show REGION ON .
- REGION OFF: PI code and covered area will not be searched.
Default setting is OFF.
PTY (Program Type) function
1. Press PTY button on the RC or select the PTY ON mode by pressing the SEL button to activate the PTY
function.
2. hen press the number buttons, you can select the music program style.
3. Press PTY the second time, then press the number buttons, you can select the language program style.
When PTY is selected, the radio starts to search corresponding PTY information, and stops if the
corresponding PTY information is detected.
If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop, if desired PTY
is not found, NO PTY is flashed, then return to previous normal radio and PTY word disappears.
4. Press PTY button for the 3
TA (Traffic Alarm) function
Press the TA/TP button shortly to select TA ON or TA OFF mode. In TA mode (LCD shows TA) traffic program
will be automatically searched, until the program is received. If it s not the TP icon will appear on the display. If
there is no RDS signal the TP icon will be blinking.
If the unit is in CD/ MMC/ SD/ USB mode, it will switch to radio mode temporarily.
rd
time to switch the PTY function off.
19