Miele G 605 Operating Instructions Manual page 52

Dishwasher installation
Place a template on each end of the
bracket as shown, making sure the
rule marks face the outside of the
brackets.
Hang the bracket on the machine
door.
Slide the top edge of the templates
under the spacer bars and control
panel.
52
Slide the mounting bracket up or
down until the oblong holes on the
machine door align with the corre-
sponding marks on the template (as
shown in the left side of inset
Draw a line on each template that is
even with the top edge of the ad-
jacent cabinet door (inset
Remove the bracket from the door.
Place the door panel on a flat sur-
face, good side facing down, taking
care not to scratch the surface.
Make certain that the bottom of the
panel is closest to you.
If the adjacent cabinetry (or ap-
pliance) does not have drawers and
alignment to a drawer line is im-
possible:
Hang the bracket on the machine
door, without the templates, and
tighten the four locking screws on
the edges of the door panel.
Close the door.
D
.
E
).