Listening To Fm; Searching For Stations; Presetting Stations - JVC NX-SA1B Instructions Manual

Listening to FM

Searching for stations

1
Select "FM."
2
Select the station.
/
(Hold)
The unit starts searching for the stations
automatically, and the station search stops
when a station of sufficient signal strength
is found.
• When you press the button repeatedly,
the frequency changes.
To stop the search manually, press 4 / ¢
again.
To improve the FM reception
If an FM stereo broadcast is hard to listen to,
you can improve the reception by switching to
monaural mode.
Press the button once to display the
current setting. Press it again to change
the setting.
AUTO: Stereo mode
MONO: Monaural mode
NOTE
• When the monaural mode is activated, the
reception is improved. However, the stereo
effect is lost.

Presetting stations

You can preset up to 40 FM stations manually.
1
Tune in to a station you want to preset.
2
Display the preset number.
P - 0 1 - 0 1
• Finish the following steps while the
indication on the display is flashing.
3
Select a preset number to store.
/
(Press repeatedly)
4
Store the station.
To tune in to a preset station
/
(Press repeatedly)
17