Asus X99-S User Manual page 124

The following items appear only when you set the Fast Boot to [Enabled].
SATA Support [All Devices]
[All Devices]
[Hard Drive Only]
[Boot Drive Only]
USB Support [Partial Initialization]
[Disabled]
[Full Initialization]
[Partial
Initialization]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
DirectKey (DRCT) [Enabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
Boot Logo Display [Auto]
[Auto]
[Full Screen]
[Disabled]
The following item appears only when you set the Boot Logo Display to [Auto] and [Full
Screen].
3-52
All devices connected to SATA ports are available during POST.
This process extends the POST time.
Only hard drives connected to SATA ports are detected during
POST.
Only boot drives connected to a SATA ports are detected during
POST.
All USB devices will not be available until OS boot up for a
fastest POST time.
All USB devices will be available during POST. This process will
extend the POST time.
For a faster POST time, only USB ports with keyboard and
mouse connections will be detected.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Disables the DirectKey button. The system will only power on or off when
you press the DirectKey button.
Allows the system to power on and go to the BIOS Setup directly when you
press the Reset button. Connect the 2-pin connector of the chassis reset
buton cable to the onboard DRCT header.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
Sets the boot logo to display during POST.
Sets the boot logo display in full screen during POST.
Disables the boot logo display during POST.
Chapter 3: BIOS setup