Marmitek M228 Owner's Manual page 14

ENGLISH
EX-228C DOME CAMERA PARTS INDICATION
1. Microphone
2. Connection wires
3. CCD camera
4. Microphone Sensitivity Adjustment
5. Mounting Screws
EX-228C DOME CAMERA
INSTALLATION
If the camera is mounted is a small enclosed area, adjust the microphone sensitivity to a lower
level.
The camera is connected by a 2 wire cable to the
connected to the terminals DR2/Cam1 or Cam2 or
EX-228C DOME CAMERA SYSTEM SETUP
• Press and hold the left button of the
Base Unit (7) for at least 2 seconds to
enter in the Setup mode. The Menu
appears on the screen.
14
Base Unit. Additional Dome Camera's can be
Cam 3. There is no polarity.
• Step through the menu
by pressing the left (7)
or right (9) button of
the Base Unit. Select
the camera
corresponding with the
Terminal number where
the camera is connected to. Activate the camera by
pressing the middle button (8).
Pick up the Handset and replace it to end the Setup
mode.
MARMITEK