Download Print this page

Marmitek M228 Owner's Manual page 13

Doorphone system
Hide thumbs Also See for M228:

Advertisement

Available languages

Available languages

EX-228H OPERATION SLAVE MONITOR
1. Visitor calls from doorunit
• Operation simular to the Base Station M228.
• Right LED lit indicates other House Unit (Base or
Slave) is on-line with the doorunit.
• When visitor calls, any House Unit (Base or Slave
monitor) will disconnect other Monitor Units
when handset is picked up.
• In above situation, other House Units (Base or
Slave) can join the conversation by pressing the
Monitoring Button (12).
• In above situation you can invite other House
Units to join the conversation by pressing the left
button (10)
2. Monitoring Audio and Video without pick-
up of the handset.
• Operation simular to the Base Unit M228
• Press right button (12) 1, 2, 3 of 4 times to select
desired camera.
• The number of camera's to choose from depend
on the number of camera's activated in on the
Base Unit M228 (max. 4 camera's).
• If more than one Monitor is set for monitoring,
the camera selection is controlled by the Base
Unit M228.
3. Intercom function
• Pickup Handset, press and hold on the left button (10). A Call Beep can be send to all connected
House Units (both Base and Slave).
• Release the left button is anyone answers by picking up the handset. There is now an intercom
connection between the two House Units.
Call
Beep
M228
Call Beep
ENGLISH
Hello
13

Advertisement

loading