Section 2: Circuit Adjustments; Using The Remote Commander For Electrical Adjustments; Accessing Service Adjustment Mode; Viewing The Service Menus - Sony KDF-46E3000 Service Manual

2-1. USING THE REMOTE COMMANDER
FOR ELECTRICAL ADJUSTMENTS
To adjust various set features, use the Remote Commander to put the
set into service mode to display the service menus and categories.
Equipment Needed:
Pattern Generator (with component outputs)
Oscilloscope
Digital multimeter
2-2. ACCESSING SERVICE ADJUSTMENT
MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
Channel 5
DISPLAY
DISPLAY
5
VOLUME (+)
RM-YD016
The fi rst service menu (TV) displays.
KDF-46E3000/50E3000

SECTION 2: CIRCUIT ADJUSTMENTS

Volume + POWER .
POWER
JUMP
Displays
Service Menus
Onscreen cursor
and select button

2-3. VIEWING THE SERVICE MENUS

Use the Remote Commander to view the BE and Digital service menus
options.
1. To display the Service Menu that contains the Category you want to
adjust, press JUMP on the Remote Commander.
(For a complete list of the service Categories refer to Service Menus)
SOFTWARE VERSION
VIDEO1 WIDE ZOOM
TVM: P1. 000U. - BOOT: 0.005
ATSC: HO7-01.01 0035
BE: 2.710
NVM: AO-1.001:OK AC-1.000:OK
SWDL 0.000
F A: 00000000 00000000
CBA: 00000000 00000000
Press JUMP
PANEL
0 OPMODE
0 ONO
DIFF
Press JUMP
WEM VERSION
Main
WM2. 710U00GA
Diff
WM2. 710U00GA
DL 0. 00 Gra 0216
SelfCheck 00 00 00 00
DEM VERSION
PMO. 000 PBO. 000
NVM: PDO. 000
Press JUMP
QM 0 0 SERVICE
INFO
Press JUMP
Sample Service Menu
KDF-46E3000/50E3000
SERVICE
480I
BOOT:A.103
SERVICE
1 60HZ
Boot
WM1. 103W00AA
Boot
WC2. 712U00GAa
DTV
32