Raid Coniguration - Standard - D-Link ShareCenter Pulse DNS-320 User Manual

D-Link ShareCenter Pulse User Manual
There are 4 types of RAID coniguration to choose from,
Standard, JBOD, RAID 0 and RAID 1. This section covers
the Standard coniguration.
Select A RAID Type:
Standard coniguration creates two separate volumes (or
one volume if only one hard drive is present). Each hard
drive is its own volume. Select the appropriate RAID type
and click on the 'Next' button.
Summary:
The next window will display the volumes connected and
prompts that the RAID coniguration will commence.
When ready click on the 'Format' button to initiate the
RAID coniguration. This process will involve initializing,
formatting and coniguration of the RAID chosen.
A warning message will be displayed before the
procedure starts stating that hard drives will be formatted
and if the user wishes to continue. Click 'OK' to continue.
After the coniguration has completed the user will be
prompted to click on the 'Finish' button.
Page 66