Preamplifier Section; Physical Specifications - NAD C 355BEE Owner's Manual

REFERENCE
SPECIFICATIONS

PREAMPLIFIER SECTION

LINE LEVEL INPUTS (DISC, CD, VIDEO, AUX, TUNER, TAPE MONITOR, TAPE2)
Signal / noise ratio pre-amp out, A-weighted
LINE LEVEL OUTPUTS
TONE CONTROLS
TRIGGER OUT
POWER AMPLIFER SECTION
Clipping power (maximum continuous power per channel 4 Ω and 8 Ω)
IHF dynamic power (maximum short term power per channel) - 8 Ω

PHYSICAL SPECIFICATIONS

1 From CD input to speakers output, volume setting for 500mV in, 8 Ω 1W out
2 Minimum power per channel, 20Hz - 20kHz, both channels driven with no more than rated distortion.
3 Total harmonic distortion, 20Hz - 20kHz from 250mW to rated output
4 Intermodulation distortion, 60Hz + 7kHz, 4:1, from 250mW to rated output
5 CCIF IM distortion, 19.5K+1kHz rated output
6 Gross dimensions include feet, volume knob and extended speaker terminals.
Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 355BEE.
12
Input impedance (R and C)
Input sensitivity (ref. rated power)
Maximum input signal
Signal / Noise ratio A-weighted 1
Frequency response 20Hz - 20kHz
THD + Noise, SMPTE IM
Output impedance - Pre-out
Tape
Maximum output level - Pre-out
Tape
Treble
Bass
Output resistance
Output current
Output voltage
Continuous output power into 8 Ω 2
Rated distortion (THD 20Hz - 20kHz)
IHF Dynamic headroom - 8 Ω
4 Ω
4 Ω
2 Ω
Damping factor (ref. 8 Ω, 1kHz)
Input impedance (R & C)
Input sensitivity (rated output into 8 Ω)
Voltage gain
Frequency response 20Hz - 20kHz
Signal/noise ratio, A-weighted
THD + Noise 3
SMPTE IM 4
IHF IM 5
Headphone output impedance
Dimensions (W x H x D) - Net
Gross 6
Net weight
Shipping weight
200k KΩ+ 100pF
300mV
6V
98.0dB ref. 1W
110dB ref. 500mV
<±0.1dB (Tone defeat on)
<±0.1dB (Tone defeat off )
< 0.01% at 5V out
80 Ω
Source Z + 1kΩ
>11V
>10V
±5dB at 10kHz
±8dB at 100Hz
<120 Ω
50mA
12V
80W (19dBW)
0.02%
92W
+2.4dB
+4.4dB
140W (21.5dBW)
220W (23.4dBW)
270W (24.3dBW)
>160
20kΩ+ 1nF
940mV
29dB
±0.1dB
105dB (ref. 1W )
124dB (ref. rated power)
<0.02%
<0.01%
<0.01%
68 Ω
435 x 116 x 292mm
435 x 130 x 338mm
8.5kg
10.4kg