Table of Contents
Advertisement
5.
When you are done, press
Removing a Password
Follow these steps:
w
1.
Use the
and
The Set Password box appears:
2.
Type the current password in the Enter Current Password field and press
e
3.
Press
twice without typing anything in the Enter New Password and Confirm New Password fields.
The computer then sets the Supervisor Password parameter to "Clear".
4.
When you have changed the settings, press
Changing a Password
w
1.
Use the
and
The Set Password box appears:
2.
Type the current password in the Enter Current Password field and press
3.
Type a password in the Enter New Password field. Retype the password in the Confirm New Password
field.
e
4.
Press
. After setting the password, the computer sets the User Password parameter to "Set".
5.
If desired, you can enable the Password on boot parameter.
6.
When you are done, press
If the verification is OK, the screen will display as following.
The password setting is complete after the user presses
38
u
to save the changes and exit the BIOS Setup Utility.
y
keys to highlight the Set Supervisor Password parameter and press the
y
keys to highlight the Set Supervisor Password parameter and press the
u
to save the changes and exit the BIOS Setup Utility.
u
to save the changes and exit the BIOS Setup Utility.
u
.
e
e
.
e
e
.
Chapter 2
key.
key.
Advertisement
Table of Contents
