Advanced - Acer Aspire 1510 Series Service Manual

Advanced

The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
Information
Infrared Port(FIR):
Base I/O address:
Interrupt:
DMA channel
Parallel port:
Mode:
Base I/O address:
Interrupt:
DMA channel
F1 Help
← →
Esc Exit
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Infrared Port
Parallel Port
Mode
Base I/O address
Interrupt
34
PhoenixBIOS Setup Utility
Main Advanced
[Enabled]
[2F8]
[IRQ 3]
[DMA1]
[Enabled]
[ECP]
[378]
[IRQ 7]
[DMA3]
↑ ↓ Select Item
Select Menu
Selects serial port address and IRQ.
Selects parallel port address and IRQ.
Allows user to specify the operating mode of parallel
port.
Note: Shows up if Parallel Port is set to Auto or
Enabled.
Allows the user to choose the resource if the
'Parallel Port' is set to 'Enable'.
Note: Shows up if Parallel Port is set to Enabled.
Sets the interrupt request of the parallel port.
Security
F5/F6 Change Values
Enter Select Sub- Menu
Description
Boot Exit
Item Specific Help
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when controlled
by OS
F9 Setup Defaults
F10 Save and Exit
Options
Disabled
/Enabled/Auto
Enabled
/Disabled/Auto
ECP
, EPP, Bi-directional, or Output
only
378h
/278h
IRQ7
/IRQ5
Chapter 2