A. Spare Tire (Valve
Stem Pointed Down)
B. Hoist Assembly
C. Hoist Cable
D. Tire/Wheel Retainer
E. Hoist Shaft
F. Hoist End of
Extension Tool
406
G. Hoist Shaft
Access Hole
H. Wheel Wrench
I. Jack Handle
Extensions
J. Spare Tire Lock
(If Equipped)
1. Open the spare tire lock cover on the
bumper and use the ignition key to remove
the lock, if equipped with a spare tire lock (J).
To remove the spare tire lock, insert the
key, turn and pull straight out.
2. Assemble the wheel wrench (H) and the
two jack handle extensions (I) as shown.