Cruise Control - GMC Sierra Denali Classic 2007 Owner's Manual

Cruise Control

R
(On): This position activates the system.
+ (Resume/Accelerate): Push the lever to this
symbol to make the vehicle accelerate or resume
to a previously set speed.
(Off): This position
9
turns the system off.
T
(Set): Press this button to set the speed.
With cruise control, you can maintain a speed of
about 25 mph (40 km/h) or more without
keeping your foot on the accelerator. This can
really help on long trips. Cruise control does not
work at speeds below about 25 mph (40 km/h).
If you apply your brakes, the cruise control
will shut off.
CAUTION:
{
Cruise control can be dangerous where
you cannot drive safely at a steady speed.
So, do not use your cruise control on
winding roads or in heavy traffic.
Cruise control can be dangerous on
slippery roads. On such roads, fast
changes in tire traction can cause
excessive wheel slip, and you could lose
control. Do not use cruise control on
slippery roads.
149