Headlamp High/Low-Beam Changer; Flash-To-Pass; Windshield Wipers - GMC Sierra Denali Classic 2007 Owner's Manual

Headlamp High/Low-Beam Changer

(Headlamp High/Low Beam Changer):
53
To change the headlamps from low to high beam,
push the lever toward the instrument panel. To
return to low-beam headlamps, pull the
multifunction lever toward you. Then release it.

Flash-to-Pass

This feature lets you use your high-beam
headlamps to signal a driver in front of you that
you want to pass. It works even if your headlamps
are in the automatic position.
To use it, pull the turn signal lever toward you,
then release it.
When the high beams
are on, this indicator light
on the instrument panel
cluster will also be on.
If your headlamps are in the automatic position or
on low beam, your high-beam headlamps will
turn on. They'll stay on as long as you hold the
lever toward you. The high-beam indicator on the
instrument panel cluster will come on. Release
the lever to return to normal operation.

Windshield Wipers

You control the windshield wipers by turning the
band with the wiper symbol on it.
(Mist): For a single wiping cycle, turn
8
the band to mist. Hold it there until the wipers
start. Then let go. The wipers will stop after
one wipe. If you want more wipes, hold the band
on mist longer.
(Delay): You can set the wiper speed for a
N
long or short delay between wipes. This can
be very useful in light rain or snow. Turn the band
to choose the delay time. The closer to the top
of the lever, the shorter the delay.
147