Maintenance Chart; Troubleshooting - Sunrise Medical Quickie Smart Seat User Instruction Manual

20
F. MAINTENANCE CHART
You should check the items on this chart at the indicated intervals. If any of the items are
loose, worn, bent or distorted, immediately have them checked and/or repaired by your
authorized Sunrise supplier. Frequent maintenance and servicing will improve performance,
extend seating system life, and help prevent injuries.
NOTE– Check weekly, and use a clean dry cloth or compressed air as needed to keep glide bearings free
of debris.
Check...
Glide bearings free of debris
Check plugs and connectors for proper connections
Check all moving parts for wear
Inspect actuator shafts for cleanliness and wear
Inspect all nuts, bolts and fasteners for looseness or wear
Inspect upholstery for wear
Operate seating systems re-home seat function
Servicing by authorized Supplier
PROBLEM
The seating system does not respond to
joystick commands OR any time power is
removed or batteries are unplugged.
The seating actuators are moved with
power off, or a seating system element no
longer moves within its desired range
You detect a significant increase in the
noise level during operation.
An actuator stops moving or moves
intermittently.
Detect noise of anti-tip lockout actuator
during recline/tilt activation and return.
930473 Rev. B
E n g l i s h
XII. TROUBLESHOOTING
Reapply power if it has been removed and
wait 2 minutes. Push "Reset" button on
front of the QMAC Controller– located
under the seat pan.
Home the seating system.
(Refer to section XI: E)
Check for loose fasteners.
Check for damaged wires or loose connec-
tors. Also check to see if all components
are free to move - insure actuator is not
binding.
No problem– this is a normal and neces-
sary part of operation. See note under
Section VIII.
X I . M a i n t e n a n c e / X I I . T r o u b l e s h o o t i n g
SOLUTION