Back Panel - Buffalo WAPS-APG600H User Manual

Chapter 1 Product Overview

Back Panel

7 8
7
Power Connector
8
Power button
9
LAN Port
10
Function expansion
USB port
11
USB Port
12
USB Eject Button
13
USB LED (Green)
On:
Randomly blinking: USB memory device can be removed.
14
RJ-45 serial console
port for settings
15
Reset Button
16
AOSS/WPS button To initiate AOSS (or WPS), hold down this button until the wireless LED
17
Maintenance port For factory use only.
10 12
9 11 13 14 15
Connect the power adapter here.
This button turns the power on and off .
These ports may be connected to computers, hubs, or other network
devices. With Auto-MDIX, you can use straight or crossover Ethernet
cables. LAN port 1 supports PoE.
This extra USB port will be used for additional functionality in the future.
With current fi rmware releases it is not enabled yet.
Connect a USB memory device here to upgrade fi rmware or save logs.
Before unplugging a USB memory device, hold down the USB eject
button for 3 seconds. The USB LED will begin to blink. It's then safe to
unplug the memory device.
USB memory device is being used.
This serial console port will be used for additional functionality in the
future. With current fi rmware releases it is not enabled yet.
To reset all settings, hold down this button until the Diag LED comes on
(about 3 seconds). Power must be on.
fl ashes twice (about 1 second).
16
17
- 7 -