Main Oven Light; Storage - Rangemaster Toledo XT 110 Ceramic User's Manual & Installation Instructions

Fig.2-32
Fig.2-33
Fig.2-34
Fig.2-35
Fig.2-36
Make sure the inner
rail is forwards
Fig.2-37
Drawer
ArtNo.320-0017

Main oven light

Remove the trivet from the pan and position the rack at the
height of the centre of the oven. Use the fan or conventional
oven settings and follow the guide time in the cooking chart
for roasting. Only use the supplied pan in the Handygrill rack
– any other vessel could be unstable.
Fitting the Handygrill
To t the Handygrill, line up the ends of the Handygrill rack
with a pair of holes in the mounting brackets on the oven
door (Fig.2-32).
Slide the ends into both uprights at the same time (Fig.2-33).
Hook the rack on to the uprights.
Main Oven Light
Press the button to turn the lights on (Fig.2-34).
If the oven light fails, turn o the power supply before
changing the bulb. See the 'Troubleshooting' section for
details on how to change the bulb.

Storage

The bottom drawer is for storing oven trays and other
cooking utensils.
To open, simply push the drawer in and release.
It can get very warm, so do not store anything in it that may
melt or catch re. Never store ammable materials in the
drawer. This includes paper, plastic and cloth items, such as
cookbooks, plastic ware and towels, as well as ammable
liquids. Do not store explosives, such as aerosol cans, on or
near the appliance.
Flammable materials may explode and result in re
n n
or property damage.
The drawer can be removed completely for cleaning, etc.
Removing the Drawer
Pull the drawer right out.
Push the ends of the plastic clips – down of the left-hand side,
up on the right-hand side – to release the catches holding the
drawer to the side rails (Fig.2-35). At the same time pull the
drawer forwards and away from the side rails.
For safety's sake push the drawer rails back out of the way.
Replacing the Drawer
To replace the drawer in the cooker, pull the side rails fully out
(Fig.2-36).
Carefully move the drawer back between the rails and rest it
on the side rails (Fig.2-37).
Push the drawer back until the clips click into place.
Rail
12